AirPods

One AirPods / Pro does not play (quietly): how to fix it?

05/02/2022 by

[ad_1]

Sound degradation in one or both AirPods (or AirPods Pro) headphones is experienced by many users as they use the headset, and not the lowest price of an accessory encourages people to immediately contact a service center. However, this is the rare case when, before a visit to specialists, it makes sense to try to fix the breakdown yourself.

So, if one AirPods earphone (AirPods Pro) began to play noticeably quieter or with some kind of permanent noise, then the cause of the breakdown may be: contamination, factory defects, mechanical damage or liquid ingress, incorrect sound source settings.

♥ BY TOPIC:How to turn an iPhone with AirPods into a spy microphone.

Video:

Why does one AirPods (AirPods Pro) play quieter than the other on iPhone (or not play at all), what is the reason?

One AirPods is empty

Unfortunately, sometimes users of AirPods of the first or second generation are faced with a broken left or right earbud. It just refuses to play sound.

1. First, place both AirPods inside their original charging case.

2. Make sure both earbuds are charging. Perhaps the reason lies in the fact that the headphones simply cannot receive energy from the case, or it does not charge itself. Then it is worth checking the performance of the case itself.

3. If there are no problems, close the lid and wait about 30 seconds.

4. Now you can check the performance of both AirPods.

Headphone pollution

This is the most common problem that you can solve on your own at home. The fact is that, unlike many budget models of in-ear headphones, AirPods (AirPods Pro) do not have silicone pads that prevent earwax from getting on the speaker grilles, as a result of which the mesh filters gradually lose their bandwidth, and the sound quality and volume decrease. .

To clean the grilles of AirPods speakers from earwax and other particles, you can use the same cotton swab that you had to clean your ears with. Having slightly moistened the cotton wool in pure alcohol or a special electronics cleaner, you should get rid of the main blockage in the center of the grate, and the perimeter can be passed with a toothpick by pressing it with minimal force. At the same time, it is not necessary to achieve 100% purity, it is enough to remove the most massive “plugs”.

♥ BY TOPIC: Apple AirPods: The 25 most common questions and answers about Apple wireless headphones.

Balance settings

More rarely, the user accidentally creates an imbalance in the sound of AirPods (AirPods Pro) in the settings of the parent device (iPhone, iPad, etc.). Go to the iOS menu Settings → Accessibility → audiovisualization and set the slider to the center in the section for setting the volume balance between the left and right channels.

♥ BY TOPIC: How to switch (turn on, pause) songs in AirPods if they don’t have a remote.

How to reset AirPods to factory settings

If the problem with one of the headphones remains, and it still does not work, then it is worth resetting the device.

1. On an iOS device, follow the path Settings → Bluetooth.

2. Next to your AirPods, tap the circle with the letter “i” inside.

3. Select “Forget this device”, and then confirm the action.

4. Place your AirPods in the case and close the lid.

5. After waiting 30 seconds, the case can be opened.

6. Press and hold the setup button until the status LED starts blinking amber a few times and then steady white.

7. Reconnect your AirPods to your device by placing them side by side. Connection instructions will appear on the screen.

Mechanical damage and defective AirPods or AirPods Pro

If after cleaning, checking and resetting the settings the problem could not be fixed, you will still have to pay a visit to a specialized service center. In this case, it should be borne in mind that headphones that are recessed or have obvious mechanical damage are not covered by the warranty.

See also:

[ad_2]

How to turn an iPhone with AirPods into a spy microphone

31/01/2022 by

[ad_1]

It turns out that from a little-known function universal access, iPhone and AirPods wireless headphones can make a real “spy” device.

♥ BY TOPIC: 20 iPhone camera features every Apple smartphone owner should know.

How it works?

You activate the function on your Apple smartphone Hearing (instructions below), and then put it next to the sound source (the phone can be slightly covered with something so that it is not visible) and listen to what they say through AirPods.

It is very convenient if you have hearing problems, or you are, for example, at a lecture away from the teacher (you can put your smartphone closer to him and listen from afar with AirPods). At least for these purposes, the function was developed at Apple:

MFi (Made for iPhone) hearing aids and sound processors, and now AirPods, help you communicate even in noisy environments. Just turn on the feature “Live listening” and bring your iPhone closer to the person you’re talking to. This feature uses the microphone to help you hear what is being said.

But there are other use cases Rumor – and they are no longer so harmless.

If you have AirPods, you can activate the function Hearing and leave your phone in the room where the conversation is taking place and listen to what they are saying from a distance.

Of course, this is illegal – and just morally ugly, so we encourage everyone to use the function Hearing only for its intended purpose.

♥ BY TOPIC: How to control iPhone by turning your head.

How to turn on Hearing mode on iPhone and turn your AirPods smartphone into a spy device

1. Add a feature Hearing v iOS Control Center. For this:

Open the app Settings and go to section Control point.

2. Click the “+” next to the item Hearing (the blue icon with the image of a human ear is located at the bottom of the screen).

3. Insert AirPods into your ears, open Control Center, and click on the hearing icon. Next, you should hear a sound notification that the function is activated.

4. To hear the clearest audio from your AirPods, place your iPhone near the sound source so that the bottom of your smartphone (where the microphone is) is closest to it.

Useful advice: do not forget that you cannot move too far from the smartphone, because. range is determined by Bluetooth technology.

See also:

[ad_2]

AirPods Max: How to hard reset or reboot your headphones

15/01/2022 by

[ad_1]

Most issues with AirPods Max on-ear headphones can be resolved by rebooting or factory resetting. But not all users know how this is done on this Apple device. In our small guide, we will give the necessary instructions.

♥ BY TOPIC: How to add a voice notification when iPhone or iPad is charging.

Which is better – reset or reboot?

These concepts are similar, but act on the device in different ways. But the essence of the differences is also not clear to everyone. Restarting your AirPods Max is just like rebooting any other device, such as an iPhone or Mac. This procedure clears the device’s RAM and reloads its software with custom settings.

A hard reset is a more drastic method, but it should help with almost any problem troubling your AirPods Max. If the reboot does not save, or you decide to return the headphones or sell them, then it is better to do the reset. Apple claims that this procedure will erase your current settings, disconnect AirPods Max from your iCloud account and from all your devices, and reset to factory settings.

♥ BY TOPIC: How to teach iPhone to automatically turn on Power Saving Mode.

How to reboot or reset AirPods Max?

You can either reset your AirPods Max, which will keep the old pairings and your settings, or reset the device, which will unlink it from your iCloud account and reset it to factory settings.

How to restart AirPods Max?

If you’re having trouble with your AirPods Max, you can quickly reset using the noise canceling control button and the Digital Crown.

1. Be sure to charge your AirPods Max for at least a few minutes before resetting them.

2. Press and hold the noise canceling button and the Digital Crown together, until the LED indicator flashes yellow (orange).

3. Release the buttons.

If you find it difficult to find the right buttons, then the noise canceling control button and the Digital Crown are located at the top of the left earcup.

♥ BY TOPIC: Tap on the iPhone Cover – Take a Screenshot: How to bind actions to touching the back of the iPhone case.

How to reset AirPods Max to factory settings?

If resetting your AirPods Max didn’t fix your problem, you might want to try resetting your AirPods Max to factory settings. This will disconnect the device from your iCloud account.

Let’s reiterate the need to charge AirPods Max before resetting them to avoid additional problems. An unpredictable situation may arise if the headphones suddenly become discharged during the procedure. When your AirPods Max battery reaches 20, 10, and 5 percent, you’ll receive a notification on your iOS device’s screen and hear a beep in your headphones.

1. Be sure to charge your AirPods Max for at least a few minutes.

2. Press and hold the noise canceling button and the Digital Crown together for about 15 seconds, until the LED indicator flashes yellow and then white.

3. The buttons can now be released.

This procedure will disconnect the headphones from your iCloud account and reset them to factory settings. After you reset your AirPods Max, you can reconnect them by removing them from the smart case and holding them near your iPhone, iPad, or Mac until the setup animation appears.

You can also pair your AirPods Max manually by going to your Bluetooth settings.

See also:

[ad_2]

What happens to AirPods after two to three years of active use

20/12/2021 by

[ad_1]

There is no doubt that AirPods are a trendy and modern accessory. Even in a rapidly changing fashion, this headset is considered top-end. Since the introduction of AirPods, a huge number of owner reviews have accumulated on the market, thanks to which you can evaluate the durability and quality of the device. How will AirPods (the same applies to AirPods Pro) change over time?

♥ ON TOPIC: Birthdays on iPhone, iPad and Mac: How to add and enable reminders.

It’s just wine that gets better over time, and even then – not always. Electronics, on the other hand, is gradually deteriorating, lowering its nominal characteristics. Here are some observations from using the headset.

AirPods battery (significantly reduced battery life)

The operation and perception of many modern gadgets is directly related to their batteries. Autonomy is one of the key characteristics of such devices. Over time, batteries lose their capacity, AirPods are no exception in this matter. Initially, the headphones can work stably for the promised 5 hours on a single charge, clearly surpassing almost all competitors in this indicator. For the first six months of use, everything will be exactly like that, besides, an additional 20 hours of work can be provided by the charging case.

On average, for a week of use in music listening mode, 2-4 hours a day, the entire set has to be charged only once a week, which is very convenient. Increasing the volume due to specific usage scenarios will reduce the autonomy of the headset. By the end of the first year of using the headphones in normal mode, the battery will probably not be enough for a day – you will have to put them in a case in the evening. This is the first call.

In the second year of use, autonomy will drop even more. You will have to charge the kit approximately every 4-5 days. But this is still enough for comfortable use. Nevertheless, the case has to be used almost every day, or even more than once. By the end of the second year, AirPods will be able to operate on a single charge for about 3 hours. But even this figure is better than that of most Chinese clones.

In the third year, the situation will worsen even more. Headphones in the previous operating mode have been serving for less than two hours – we can talk about the loss of half of the battery capacity. The battery is discharging right before our eyes. In addition, in many cases, headphones are not discharged synchronously at all.

♥ ON TOPIC: Why you need to use the “Sign in with Apple” function for authorization in applications and websites.

Clogged AirPods

AirPods have one problem that doesn’t get resolved over time – you have to be prepared for it. The white glossy headset case constantly attracts dirt, although it is not among the debris. Interestingly, the headset itself looks almost perfect over time. The case accumulates dust and dirt in itself, which will clearly be unpleasant for most users. There is even a dark coating on the inside of the case, which eats into the plastic – it is quite difficult to remove it with a simple wipe.

However, there are simple ways to quickly get rid of dirt on your case. For example, you can take cotton swabs or pads, soak them in nail polish remover, and then wipe down any dirty areas. This will help remove major stains from the plastic. The case will look good, even if it scuffs over time.

You can also use an alternative method:

♥ ON TOPIC: Forgot iPhone password: how to reset – 2 ways.

The case is lost

Surprisingly, losing your briefcase is easier than losing one small earpiece. Nevertheless, the headset sits perfectly in the ears and the earpiece can fall out only if you accidentally hook it with your hand. But forgetting somewhere a case, empty or with contents, turns out to be quite simple – the compact case plays a cruel joke here. With AirPods Pro, this problem will clearly occur less often due to the increased size and weight of the case. Once in his pocket, he will not let himself be forgotten.

A lost kit is an offensive situation, you will have to remember where the AirPods have gone. And technical solutions will not help here. The headset appears in Find Find, but requires a network connection, which can only be done using iPhone. When paired with another smartphone, the AirPods will be reset, which removes their binding to the previous device.

♥ ON TOPIC: How to save a website page in Safari on iPhone (iPad) for reading without the Internet: 5 ways.

Connection problems (sometimes one earbud will not connect)

There is another unpleasant moment that sometimes begins to manifest itself after several years of using AirPods – only one earphone is connected to the smartphone. Because of this, the second must be placed back in the case, and then reinserted into the ear. According to user reviews, the right earpiece most often suffers from this behavior for some reason. Neither resetting the headphones, nor re-pairing, nor updating the iOS firmware helps. But there is one tip – when placing AirPods in the case, make sure that the LED blinks once. If not, take out the headphones and put them back in.

♥ ON TOPIC: Why you need to disable iCloud backups for most iPhone and iPad users.

The sound remains high quality

Despite all the problems that accumulate over time, the sound of AirPods remains high quality. There is no difference in sound between a new headset and a used one for 3 years. The volume is reduced a little, but the light bass and clear vocals are still in place.

♥ ON TOPIC: How to quickly translate sites (web pages) in Safari on iPhone and iPad: 3 Ways.

Do not forget about the warranty (headphones can be replaced with new ones)!

Few people think that the problems that have appeared over a couple of years of using AirPods can be solved very simply and effectively – by changing the headphones to new ones. Apple’s warranty is 1 year, and besides, the consumer protection law “throws in” the same period, provided that the headphones were purchased from “officials” (for example, here). As a result, a well-founded complaint about deterioration in the performance of an officially purchased device must be satisfied by replacing it. And this is not a fantasy scenario at all – many users do just that.

♥ ON TOPIC: The File Manager for iPhone and iPad as It Should Be: Readdle’s Documents Review.

How long does AirPods last?

It is safe to say that AirPods more or less retain their properties for about three to four years. Further, due to the loss of battery capacity, problems will begin, even if the sound remains clear. But there is already a replacement and it seems obvious – the new AirPods Pro are devoid of some of the shortcomings of the first model. However, the price drop for the first generation AirPods also makes them a good choice. The proven model will not come as a surprise. And there are hardly any analogues on the market whose properties will obviously not deteriorate in 3 years.

See also:

[ad_2]

How to fix the bad sound of any AirPods on Mac and Windows 10

24/11/2021 by ALOK DAS

[ad_1]

If you connect Bluetooth headphones to a computer on macOS or PC, the sound from them can be terrible like the plugs from the transition for 100 rubles. No one is safe from the problem, but she solved in a few clicks.

When I ran into it myself, I had to delve into English-language sites: in Russian I found help only for macOS.

Here is an instruction on what to do in both cases. It will help everyone who has a Bluetooth headset.

Headphones record and play sound simultaneously

AirPods has two modes: listening and talking. In the second case, the sound quality decreases, because the headphones work on input and output immediately.

This happens when something is trying to record a sound right now. For example, opened in the background of Shazam or a fixed recording of audio messages in the messenger.

Windows 10 can tie additional functionality to the headset, such as “telephone communications,” which I’ll describe as disconnect below.

How to improve AirPods (Pro) sound on macOS

Check and close programs that have access to the microphone:

1. Select Apple menu () -> System settings
2. Click Protection and Security -> Confidentiality
3. Click on the item on the left. Microphone. On the right are programs that can record sound. Do not change anything here
4. Select Apple menu () -> Forcefully complete …
5. Close all open programs that are listed in step 4.

Important. In the window Finish pyrrindly … all open applications are not displayed. If the sound is still bad, close the programs from step 4 in MacOS status bar (where is the clock and charge).

Reconnect the audio output source if the program did not help to close:

1. Select Apple menu () -> System settings
2. Click Sound -> Exit
3. In the list, select Built-in speakersthen again mine Airpods.

Menu entrance in the same settings, turns on the microphone of the selected device. Therefore, clicking on this item immediately reduces the quality of the reproduced sound. Make sure the menu is closed.

How to Improve AirPods (Pro) Sound on Windows 10

Disconnect the “telephone connection” of the device:

1. Go to Control Panel. To do this, on the desktop, click Win + r -> enter “control panel” and click OK
2. Select Equipment and sound -> Devices and Printers
3. Find your headphones in the list of devices and go to their The properties through RMB
4. Click on Services
5. Make sure that Wireless telephone no checkmark

Check and close the programs that use the microphone, if disconnecting the telephone did not help:

1. Select Start -> Parameters
2. Click Confidentiality -> Microphone
3. Scroll to the beginning of the list of applications with access to the microphone. Do not change anything here
4. Open Task Manager keyboard shortcut Ctrl + Shift + Escape
5. Close all open programs that are listed in step 4.

As a result, we just turned off the microphone

While this is a noticeable drawback of Bluetooth technology: the headphones sound great only as long as there are the right conditions.

Outgoing sound will deteriorate during recording because the data transfer modes are changing. Because of this, PC headsets are still advised to use wired options.

After turning off the programs that use the microphone, your headphones will shut up for a few seconds, and then the high-quality sound will return to them.

If this does not happen, do not be afraid to contact support. She helps.

AirPods 2 vs AirPods 3 vs AirPods Pro comparison

22/10/2021 by

[ad_1]

Autumn is the time when Apple pleases us with new products. First, the iPhone and the new iPad were shown, and later it was time to surprise everyone with the new MacBook Pro. Together with them, the third generation of the AirPods wireless headset was presented in October 2021. This device received both visual and functional differences from its predecessor. Now it looks more like the much more status AirPods Pro. It is noteworthy that with the release of AirPods 3, the previous model remained on sale. Let’s take a look at the current lineup of compact wireless headsets from Apple, finding out the main differences between them.

♥ BY THEME: How to display photos or videos from iPhone or iPad to TV – 4 ways.

AirPods 2, AirPods 3, and AirPods Pro sizes and design

And although we are talking about different generations of headsets, from their appearance it is clear that they are related. Common design features are evident. Both the headphones and the cases are made of glossy white plastic.

AirPods 2 design

AirPods 3 are positioned as a cross between AirPods 2 and AirPods Pro. Interestingly, this also affects the size of the case. In the 2021 model, it turned out to be clearly wider than its predecessor and narrower, but at the same time not as large as in the AirPods Pro.

AirPods 3 design

In fact, the cases of AirPods 3 and AirPods Pro are very similar to each other in their rectangular shape, the case of AirPods 2 is much closer to a square shape. Yes, and the two older models have a charging indicator on the front panel, in AirPods 2 it is hidden inside, under the lid.

AirPods Pro design

The case has no other characteristic elements. The weight of the case is different for all three models, but these grams will be difficult to grasp:

AirPods 2 Case: 53.5 x 44.3 x 21.3 mm, weight 38.2 g.
AirPods 3 Case: 46.4 x 54.4 x 21.38 mm, weight 37.91 g.
AirPods Pro Case: 45.2 x 60.6 x 21.7 mm, weight 45.6 g.

In addition, it should be noted that AirPods 2 and AirPods 3 cannot adapt to the listener’s auricle – they have the same size of the plastic case, while the AirPods Pro package contains 3 pairs of silicone earbuds of different sizes.

The conditionally intermediate status in the AirPods 3 line will facilitate the transition from AirPods 2 or AirPods Pro to AirPods 3. The difference between cases will not be as significant as when switching from AirPods 2 to AirPods Pro. In this case, it is clearly difficult to quickly get used to the new case due to the difference in size.

Now let’s talk about the headphones themselves. Here are the sizes of devices of different generations:

AirPods 2: 40.5 x 16.6 x 18 mm, weight 4 g.
AirPods 3: 30.79 x 18.26 x 19.2 mm, weight 4.28 g.
AirPods Pro: 30.9 x 21.8 x 24 mm, weight 4 g.

Obviously, AirPods Pro are the largest and heaviest. This is due to both their shape and hardware stuffing. The professional model has silicone ear pads that are absent in regular AirPods 2 and AirPods 3. But the third model is more reminiscent of AirPods Pro in its shape. In the 2021 model, the leg has decreased by 30% relative to its predecessor, the earbuds themselves are stretched, the mesh on the microphones is now flush with the surface, and not submerged, as in AirPods 2.

♥ BY THEME: How to remove badges (red circles) of notifications on application icons on iPhone.

Sound and hardware AirPods 2, AirPods 3 and AirPods Pro

Naturally, in-ear AirPods Pro sound better than AirPods 2 and AirPods 3. While the difference between AirPods 2 and AirPods 3 is not so significant, it is also present in favor of the “third AirPods”.

Despite the compact size of the headsets, the manufacturer has equipped them with highly technological solutions, including sensors and sensors. All this hardware stuffing helps to implement various useful scenarios for working with the headset: smart turning on and off music, switching to a new track, etc.

Of course, the most modest set of solutions received AirPods 2: dual optical sensor, accelerometer, voice activity sensor. However, even this is quite enough for automatic pause and unpause, choosing the best microphone for a conversation and fixing the movement of the headset in space.

AirPods 3 received an extended set: skin contact sensor, accelerometer, voice activity sensor, pressure sensor (control button on the leg). Although the optical sensor already performs well, in the new generation it has been replaced by a skin contact sensor. It allows you to accurately determine when the device is in your ear.

And here AirPods Pro received a certain average set: a double optical sensor, an accelerometer, a voice activity sensor and a pressure sensor (control button on the leg). These are all the same sensors as the AirPods 2, but a pressure sensor has been added to them for better control of the headset.

“Iron” AirPods Pro

In this regard, AirPods 3 looks advantageous, which has received a completely new sensor, its brothers simply do not have it. The rest of the set of sensors repeats in one way or another – this is an accelerometer and a voice detector, as in AirPods 2, as well as a squeeze sensor, as in AirPods Pro.

All three headsets have the H1 chip installed, it has proven itself well, so it remained relevant for the 2021 model as well. Thus, the basic functions of interaction with the Apple ecosystem for all three models will be the same. All current AirPods will switch between devices equally quickly. Bluetooth 5.0 support is also the same for all models. All three headsets have dual microphones to monitor the user’s voice activity, but the AirPods 3 and AirPods Pro also have an additional microphone built in, directed inward. It is also worth noting that only these two older models received IPX4 protection against sweat and water.

♥ BY THEME: How to teach iPhone to automatically turn on Power Saving Mode.

AirPods 2, AirPods 3, and AirPods Pro features

Each of these headsets supports voice-activated Siri. All you need to do is say “Hey Siri”. The AirPods in question can automatically switch between different devices linked to the same Apple ID account. At the same time, only AirPods 3 and AirPods Pro have an adaptive equalizer that adjusts the sound of the headset to the shape of the listener’s ear. Also, these two models support listening to spatial audio, analyzing the position of a person’s head, they also have a wide dynamic range.

Features exclusive to AirPods Pro: active noise cancellation (an external microphone picks up external noises, which are compensated by a backward sound wave of the same amplitude), transparency mode (in order to hear external noises), equalization system. And with iOS 15, the headset also received the “Communication” mode, which is designed to talk with the interlocutor without taking off the headphones.

The positioning of the models is obvious. AirPods 2 is a pretty feature-packed device, but the 2021 model has received several new features, including from the AirPods Pro range. But the pressure equalization system and the noise reduction function are available only in the professional model, which is justified by the design of the earbuds.

♥ BY THEME: How to add a second person to unlock iPhone with Face ID.

AirPods 2, AirPods 3, and AirPods Pro control gestures

The ability to work with gestures is a big advantage for AirPods over the competition. Even AirPods 2 can recognize the double or triple tap gesture. Thus, the user can answer a call or drop it, switch tracks. You can set up separate gestures for each of the earbuds. AirPods 3 and AirPods Pro are controlled by squeezing a special sensor. A single press on it allows you to stop or restart music playback, as well as answer an incoming call. By double and triple squeezing, you can switch tracks.

At the same time, in AirPods Pro, you can also hold the sensor for a long time. This will switch the noise canceling modes. There is a similar action in AirPods 3, but it is duplicate in relation to the command “Hey Siri”, leading to the activation of the voice assistant.

Controls in AirPods 2

Double tap to start playback, skip to the next track, or answer a call;
Say “Hey Siri” to play a song, call or get directions;

Controls in AirPods 3

Press once to start or pause playback or answer a call;
Press twice to skip to the next track;
Press three times to return to the previous track;
Press and hold to summon Siri;
Say “Hey Siri” to play a song, call, or get directions.

AirPods Pro controls

Press once to start or pause playback or answer a call;
Press twice to skip to the next track;
Press three times to return to the previous track;
Press and hold to switch from Active Noise Cancellation to Transparent mode or vice versa;
Say “Hey Siri” to play a song, call, or get directions.

♥ BY THEME: How to send and receive self-deleting messages in Telegram (text, photo or video).

Autonomy of AirPods 2, AirPods 3 and AirPods Pro

The autonomy of AirPods is a traditional source of pride. The second generation can work without recharging up to 3 hours of talk time and up to 5 hours of listening to audio. When using the charging case, you can listen to music for up to 24 hours and talk for up to 18 hours. 15 minutes of charging in the case is enough for the headset to play audio for 3 hours.

The AirPods 3 have improved battery life even further. Now the headset allows 4 hours of talk time and 6 hours of listening to music. Thanks to the case, you can already provide 20 hours of talk time and 30 hours of music. Just 5 minutes of charging is enough to keep the device running for another hour.

But the AirPods Pro autonomy is a cross between the second and third generation of the headset. The professional model will work 4.5 hours when listening to audio and 5 hours without using Transparent mode and active noise cancellation, and talk time up to 3.5 hours. The charging case provides comparable capabilities to AirPods 2 – 18 hours of talk time and 24 hours of music. But charging is faster here – 5 minutes is enough for an hour of operation.

Obviously, it is the 2021 model that outperforms its counterparts in terms of autonomy. When listening to music, AirPods 3 will live 1 hour longer, and in mixed mode, with a recharge in a case, it will last 5-6 hours. This is a pretty big difference, as for many people the difference will be 1-3 extra days of use without having to recharge.

♥ BY THEME: Which iPhone holds the battery better? Comparison of the battery life of all current iPhones.

Other differences between AirPods 2, AirPods 3 and AirPods Pro

AirPods 2 come with a Lightning to USB ‑ A cable, while the older two come with a more modern Lightning to USB ‑ C cable.

AirPods 3 and AirPods Pro charging case Supports both MagSafe and (Qi) wireless chargingand charging with a cable. In turn, the AirPods 2 case can only be charged with a cable…

AirPods 2 can work with Apple’s line of smartphones starting with the iPhone 5. But the two older siblings will require the first generation iPhone 6s or iPhone SE. Of course, all headsets can be connected to older smartphones, but important software functions will not work. Apple recommends using AirPods with smartphones updated to iOS 13.

♥ BY THEME: How to recognize text from photos on iPhone without installing third-party applications.

Comparison of technical characteristics of AirPods 2, AirPods 3 and AirPods Pro

♥ BY THEME: Is your iPhone taken when you sleep? How to check.

Briefly the main differences:

AirPods Pro sound better than AirPods 3 and AirPods 2, while sound in AirPods 3 is marginally superior to AirPods 2.
AirPods 3 are closer to AirPods Pro in design and dimensions than AirPods. Even their cases are similar in shape and size, and the shape of the headphones is similar. A clear difference is the presence of three silicone earbuds of different sizes in the professional model. The leg in AirPods 3 has become smaller by a third compared to the second generation of the device.
The processor is the same for all models, and the hardware is similar. The AirPods 3 have a new skin contact sensor, while the other two models have a dual optical sensor. The 2021 model has an additional internal microphone and IPX4 sweat and water resistance – just like the Pro model.
Technology support in AirPods 3 is also much better than its predecessor, and closer to the Pro model. On the side of the latter, only the functions related to noise cancellation.
The control gestures in AirPods 3 are almost identical to those in AirPods Pro. The only difference is the reaction to pinching the sensor. On AirPods Pro, this triggers toggling noise canceling modes, and on AirPods 3, Siri is activated.
The AirPods 3’s battery life is clearly superior to the other two devices. The novelty received an extra hour of work, and when interacting with the case, it will be possible to win as much as 5 hours.
The younger model comes with a Lightning to USB-A cable and lacks gj wireless charging support for MagSafe or Qi technology. AirPods 3 and AirPods Pro have it and come with a modern Lightning to USB-C cable.

♥ BY THEME: How to transfer current call from iPhone to iPad or Mac.

AirPods 2, AirPods 3 and AirPods Pro pricing

Buy AirPods 2 – 10,000 rubles

Buy AirPods 3 – 16,000 rubles

Buy AirPods Pro – 18,000 rubles

Conclusion

A direct comparison of the three wireless headsets that are relevant to Apple shows that the latest model, AirPods 3, turned out to be as close as possible to AirPods Pro in most indicators, from design to functionality. Moreover, the novelty even wins in terms of autonomy. But the “pros” have their own unique “trick” – active noise cancellation. When choosing a wireless headset, it is worth considering what type of headphones you like in general. If you prefer earbuds, then the superiority of AirPods 3 is undeniable, but if you like earplugs, then choose AirPods Pro. On the side of AirPods 2, perhaps a lower price tag, but the savings of 2,000 rubles is hardly worth it to deprive yourself of the opportunity to use a more functional and long-playing device.

See also:

[ad_2]

Apple AirPods 3 review: the golden mean of Apple headphones

21/10/2021 by

[ad_1]

Apple’s wireless AirPods have become an essential feature for many of us. But this device appeared on the market relatively recently – in 2016. After 3 years, the second generation of the headset was released, with a new processor and more economical. The success of these models became the foundation for the emergence of the AirPods Pro, a much more advanced model that can meet the most demanding needs. Finally, the time has come to update the time-tested hit – in October 2021, the third generation AirPods were presented. We will tell you how these wireless headphones turned out in our review.

♥ BY THEME: How to display photos or videos from iPhone or iPad to TV – 4 ways.

Apple AirPods 3 (2021) design

There is no need to talk about a revolutionary change in the design of the third generation model. AirPods 3 are all the same white in-ear droplets with thin legs. But in this model, they are 33% shorter, and the design itself is more contoured, suitable for most ears. We can say that this is a cross between AirPods 2 and AirPods Pro.

Left to right: AirPods 2, AirPods 3, and AirPods Pro

Apple has remained committed to its chosen shape, just tweaked it a bit. Headphones should sit in your ears at the correct angle for maximum comfort and best sound. Items are made of plastic and offer one size, silicone tips, as in AirPods Pro, they do not have… The height of each earphone is 30.79 mm, its width is 18.26 mm, and the thickness is 19.21 mm. Each earbud weighs only 4.28g.

Black acoustic nets stand out on the side and top of the droplet. They cover the microphone and reduce wind noise during calls. The mesh is flush with the surface of the device, and not recessed inside, as it was previously. The lower part of the stem is given to the pressure sensor, which allows you to control music playback and calls. On the side of the leg there is an oval recess-button.

The case for storing and recharging the headphones is rectangular in shape with rounded corners. Just below the slot in the cover there is a charging indication LED. The slot itself has a recessed strip, which allows you to conveniently grip it when opening the case. At the bottom of the case there is a Lightning connector for charging the device. The dimensions of the case are 54.40 x 46.4 x 21.38 mm, and it weighs 37.91 g.

♥ BY THEME: How to remove badges (red circles) of notifications on application icons on iPhone.

Features and performance of Apple AirPods 3 (2021)

The H1 chip that appeared in the model of the previous generation to improve connection stability and reduce power consumption in the main scenarios of work remained in AirPods 3. They themselves, despite their size, offer many interesting functions. First of all, it is an excellent sound presentation. AirPods 3 generate spatial audio and can dynamically track head movements. This allows you to create a vivid three-dimensional picture of the sound, as if the listener were in a movie theater or concert hall. The effect is achieved thanks to the built-in gyroscopes and accelerometers in AirPods 3.

AirPods 3 has an adaptive equalizer that adjusts the music to the user’s personal preferences. The geometry of the human ear is taken into account. Inward-firing microphones measure the characteristics of the audible sound. Based on this data, AirPods 3 automatically adjust bass and mids in real time to maximize all musical nuances.

Compact earbuds are often blamed for lack of bass, but AirPods 3 have dealt with that problem. Apple’s specially designed dynamic driver uses an amplifier to deliver detailed sound. This will allow you to transmit the entire spectrum, not only rich and deep bass, but also crystal clear high notes.

The pressure sensor on the headphone foot allows you to start and stop playback, rewind tracks, answer and end calls.

Controls in AirPods 3:

Press once to start or pause playback or answer a call;
Press twice to skip to the next track;
Press three times to return to the previous track;
Press and hold to summon Siri;
Say “Hey Siri” to play a song, call, or get directions.

AirPods 3 have a new AAC-ELD speech codec that will clearly improve audio for FaceTime calls. Calls via the messenger will receive HD-quality, with the help of spatial audio group communication will be hardly distinguishable from live.

The AirPods 3 themselves, like their MagSafe charging case, are sweat and water resistant with an IPX4 rating. This allows you to use the headset both in the rain and during intense workouts.

The skin contact sensor has also been improved, which allows the device to better detect its location in the ears or on the surface. As soon as you take the AirPods 3 out of your ears and place them on a table or in your pocket, playback stops.

Communication takes place using the Bluetooth 5.0 protocol.

♥ BY THEME: How the Find in Page search option works in Safari on iPhone and iPad.

Autonomy and charging Apple AirPods 3 (2021)

AirPods 3 continues to be a highly autonomous device. But in this generation, these indicators have grown even more. The headphones can now operate in audio playback mode for up to 6 hours, and with spatial audio up to 5 hours. In the talk mode, the headset can work up to 4 hours. A full charge of the case can provide 30 hours of audio or 20 hours of talk time. Even if the AirPods 3 are completely depleted, you can put them in the charging case for five minutes and listen for another hour.

The case can be charged as with a Lightning connectorand via Qi wireless chargers… The third generation AirPods also added MagSafe chargers support…

♥ BY THEME: How to teach iPhone to automatically turn on Power Saving Mode.

Hey Siri

AirPods 3 boast Siri always on. With the help of voice commands, you will be able to turn on music, plan routes, clarify the schedule. The phrase “Hey Siri” starts communication with the voice assistant. He can tell you what percentage of the charge is left, report the receipt of important notifications, and even read them out and write down responses under dictation.

♥ BY THEME: Ringtone (melody) on iPhone: how to make and install using a computer.

Apple AirPods 3 Bundle (2021)

Includes AirPods 3 and MagSafe charging case. There is a Lightning to USB-C cable to connect it to a power source, adapter not included… Of course, there is a set of accompanying documentation.

♥ BY THEME: How to send and receive self-deleting messages in Telegram (text, photo or video).

Apple AirPods 3 (2021) headphone price

AirPods 3 headphones can be purchased for 16,490 rubles. At the same time, Apple allows free engraving on the case of your name, some significant numbers or emoticons.

The new MagSafe case has not yet been sold separately.

See also:

[ad_2]

Best Cases and Accessories for AirPods and AirPods Pro from AliExpress

20/07/2021 by ALOK DAS

[ad_1]

All newly minted AirPods owners know that with active use, the charging case of the earbuds is pretty covered with scratches and rapidly loses its attractive appearance. Some users simply do not pay attention to this, while others are considering protection with a case.

We have compiled a selection of the best AirPods cases from the popular AliExpress marketplace for every taste. In addition, we will also tell you about a couple of useful headphone accessories that we recommend ordering.

♥ BY THEME: 20 useful items for the cyclist: bags, mounts, tools, headlights, etc.

Baseus Silicone Case

Excellent cases for AirPods 1 and 2 versions made of excellent quality colored silicone, fits snugly on the case. To remove you need to make a little effort. The material is pleasant to the touch. A big plus is that silicone does not increase the dimensions of the case and the headphones do not take up more space in your pocket.

Buy AirPods Silicone Case

There is a version of the case for AirPods Pro, it has a plug on the charging connector that protects the port from dust and moisture.

Buy Silicone Case for AirPods Pro

♥ BY THEME: Top 5 Best iPhone Screen Protectors from AliExpress.

Marbled AirPods Case

Beautiful cases for AirPods 1 and 2 models made of durable silicone with high-quality realistic marble print.

Buy AirPods Marble Case

♥ BY THEME: 10 useful devices for the car from Xiaomi 70mai.

Leather case for AirPods

High-quality beautiful cases made of genuine leather for all versions of AirPods. They look stylish and effective. There is a carabiner with which you can attach the headphones to jeans or a belt.

Buy Leather Case for AirPods

♥ BY THEME: 20 useful products for tourism, camping, fishing and other outdoor activities with AliExpress.

Cool 3D AirPods Case

Cool 3D cases for AirPods 1 and 2 versions in numerous designs. There is, for example, in the form of an Instagram icon.

Buy Cool 3D AirPods Case

Nike + Style AirPods Case

Apple Watch Nike + Band-style AirPods Case. Available for both regular AirPods and Pro version. 10 colors to choose from, inexpensive.

Shop Nike + Style AirPods Case

♥ BY THEME: Xiaomi 70mai Air Compressor Lite: quality quiet car compressor (pump).

Alcantara AirPods Case

Covers for all AirPods in Alcantara. The accessory looks very expensive and beautiful, and attracts additional attention.

Buy Alcantara case for AirPods

♥ BY THEME: Waterproof case for iPhone 12, 11, XS, XR, 8, 7: review of the best options from AliExpress.

Various Cartoon Characters AirPods Case

Lot with a large selection of cases for the AirPods charging case in the form of all kinds of cartoon characters. We like very much the Xbox controller and the burger, they look cool.

Buy Cartoon AirPods Case

Resin AirPods Case

Protective case for AirPods 1 and 2 versions, as well as AirPods Pro made of polymer material, which will protect the headphone case even from the most unpleasant damages and bumps, thousands of orders.

Buy a polymer case for AirPods

♥ BY THEME: Baseus Gadgets: 10 Useful Devices for iPhone, Android and Mac Users.

Case for AirPods with pop-it and simple dimple

Case with pop it and simple dimple for Airpods. You can click the anti-stress toy anywhere, but headphones are always at hand, many colors to choose from.

Buy case with pop-it and simple dimple for AirPods

♥ BY THEME: 5 best fast GaN chargers from AliExpress for iPhone, iPad and Mac.

AirPods Cleaning Kit

Cleaning kit for AirPods, AirPods Pro and other TWS headphones. It is inexpensive.

Buy AirPods Cleaning Kit

♥ BY THEME: Review: Amazfit Neo smart waterproof watch in Montana style from 80s with autonomy over 30 days.

Bag for AirPods Max

AirPods Max 2-in-1 bag and case. In this case, the headphones are protected from damage and water ingress. There is a compartment for the cable.

Buy bag for AirPods Max

♥ BY THEME: Xiaomi (Huami) Amazfit GTS Review: Cool Inexpensive Smartwatch with Apple Watch Design and Up to 46 Days of Battery Life.

AirPods Pro Accessory Set

The kit includes: a silicone case, a carabiner to hang the headphones on the bag, a lanyard to comfortably listen to music while doing sports, an Apple Watch strap holder to wear the headphones on your hand, and a special case for all these useful accessories.

Buy a set of accessories for AirPods Pro

♥ BY THEME: Review of the fitness bracelet Xiaomi Mi Band 5: price, design, functions, where to buy.

Magnetic Wireless Charger for iPhone 12 and AirPods

Magnetic wireless charging for all versions of iPhone 12 and AirPods. Holds reliably, there is a 15W fast charge. Positive feedback from users. Even the original animation is supported when connected like a real MagSafe.

Buy Magnetic Wireless Charger

♥ BY THEME: How to make a smart home with your own hands: 20 useful devices from AliExpress.

Silicone pads for AirPods

Silicone ear pads for AirPods to keep the earbuds snug in your ears and don’t fall out. They are thin and do not interfere with the use of the case for charging the headphones at all. Any color can be ordered.

Buy silicone pads for AirPods

See also:

[ad_2]

One AirPods / Pro earphone does not play (quietly): how to fix it?

24/02/2021 by ALOK DAS

[ad_1]

Many users experience sound degradation in one or both AirPods (or AirPods Pro) headphones as they use the headset, and the not the lowest price of the accessory encourages people to immediately contact the service center. However, this is the rare case when it makes sense to try to fix the breakdown yourself before visiting a specialist.

So, if one AirPods (AirPods Pro) earphone began to play noticeably quieter or with some permanent noise, then the cause of the breakdown may be: pollution, factory defects, mechanical damage or ingress of liquid, incorrect sound source settings.

♥ BY TOPIC: How to turn an iPhone with AirPods into a spy microphone.

Why does one AirPods (AirPods Pro) play quieter than the other on the iPhone (or not play at all), what is the reason?

One AirPods is low

Unfortunately, sometimes first or second generation AirPods users are faced with a broken left or right earbud. It just refuses to play sound.

1. First, place both AirPods inside their original charging case.

2. Make sure both earbuds are being charged. Perhaps the reason lies in the fact that the headphones simply cannot receive energy from the case, or it does not charge itself. Then it is worth checking the performance of the case itself.

3. If there is no problem, close the cover and wait about 30 seconds.

4. You can now test the functionality of both AirPods.

Dirty headphones

This is the most common problem that you can solve yourself at home. The fact is that, unlike many budget models of in-ear headphones, AirPods (AirPods Pro) do not have silicone pads that prevent earwax from getting on the speaker grilles, as a result of which the mesh filters gradually lose their bandwidth, and the sound quality and volume decrease. …

To remove earwax and other particles from the AirPods speaker grilles, you can use the same cotton swab you used to clean your ears. Having slightly moistened cotton wool in pure alcohol or a special electronic cleaner, you should get rid of the main blockage in the center of the grill, and you can go through the perimeter with a toothpick by pressing on it with minimal force. In this case, it is not necessary to achieve one hundred percent purity, it is enough to remove the most massive “plugs”.

♥ BY TOPIC: Apple AirPods: 25 Common Questions and Answers About Apple Wireless Headphones.

Balance settings

A rarer case when the user accidentally creates an imbalance in the sound of AirPods (AirPods Pro) headphones in the settings of the parent device (iPhone, iPad, etc.). Go to the iOS menu Settings → Accessibility → Audiovisualization and set the slider in the center in the section for adjusting the volume balance between the left and right channels.

♥ BY TOPIC: How to switch (turn on, pause) songs on AirPods if they don’t have a remote control.

How to factory reset AirPods

If the problem with one of the headphones remains, and it still does not work, then you should reset the device.

1. On an iOS device, follow the path Settings → Bluetooth…

2. Next to the AirPods, tap the circle with the letter “I” inside.

3. Select Forget this device, and then confirm the action.

4. Place the AirPods in the case and close the cover.

5. After waiting 30 seconds, the case can be opened.

6. Press and hold the setup button until the status light flashes amber several times and then solid white.

7. Reconnect the AirPods to your device by placing them side by side. Connection instructions will appear on the screen.

Mechanical damage and marriage AirPods or AirPods Pro

If, after cleaning, checking and resetting the settings, the problem was not resolved, then you still have to pay a visit to a specialized service center. At the same time, it should be borne in mind that headphones that are sunken or have obvious mechanical damage are not covered by the warranty.

See also:

[ad_2]

How to switch (turn on, pause) songs on AirPods

13/02/2021 by ALOK DAS

[ad_1]

While the regular wired EarPods included with the iPhone have a remote control that has extensive control over music playback, the wireless AirPods do not. So how do you switch (play, pause) songs?

♥ BY TOPIC: How to automatically change wallpaper on iPhone or iPad based on time, place, etc.

Auto play

AirPods that are paired with your device are placed in your ears and automatically play music. When you remove one AirPods, song (track) playback is paused. Removing both headphones will completely stop playback (analogue of the Stop).

This function is configured along the way Settings → Bluetooth → AirPods → Auto ear detection on an iPhone or iPad, but you should consider:

If the function Auto detect ear included, but at the same time the headphones are not used, the music will be played through the speakers of the iOS device.
If the function Auto detect ear off, then in this case all audio recordings will be played in the AirPods, regardless of whether they are in the ears or not.

♥ BY TOPIC: How to turn an iPhone with AirPods into a spy microphone.

How to control your AirPods wireless headphones

Headphones are controlled using Siri. The voice assistant is invoked by double tapping on any AirPod.

Siri can do whatever it takes with them! Apple lists several examples of Siri voice commands for AirPods:

“Play my favorites playlist.”
“Turn up the volume.”
“How do I get home from here?”
“Move on to the next song.”
“Pause the music.”
“What is the battery level in my AirPods?”

It’s worth noting that on iOS along the way Settings → Bluetooth → AirPods → Left (Right) you can change the action of any of the headphones to double tap. There is an opportunity to activate playback, pause, go to the next or previous track through double tapping, or completely disable this feature.

♥ BY TOPIC: How to add a voice alert when iPhone or iPad is charging.

How to answer a call in AirPods

If someone calls you while you are listening to music in AirPods, Siri can announce the call. You can answer it with a double tap on the top of any earpiece.

Selecting the AirPods with the microphone

Each AirPod comes with a microphone for making phone calls and using Siri. By default, iOS uses Automatic for microphone settings, in other words, any of the headphones can be used as the microphone. If only one AirPod is used, then it is he who will be the microphone.

IN Settings iOS on the way Bluetooth → AirPods → Microphone it is possible to force the value “Always the right earpiece” or “Always the left earpiece“. With specific settings, the AirPod will act as a microphone, even if removed from your ear.

See also:

[ad_2]

How to turn an iPhone with AirPods into a spy microphone

09/02/2021 by ALOK DAS

[ad_1]

It turns out from a little-known function Accessibility, iPhone and AirPods wireless headphones can make a real “spy” device.

♥ BY TOPIC: 20 iPhone Camera Functions Every Apple Smartphone Owner Should Know

How it works?

You activate the function on your Apple smartphone Hearing (instructions below), and then put it next to the sound source (the phone can be slightly covered with something so that it cannot be seen) and listen to what they say through AirPods.

It is very convenient if you have hearing problems, or you are, for example, at a lecture away from the teacher (you can put your smartphone closer to him and listen from afar through AirPods headphones). At least for these purposes, the function was developed at Apple:

MFi (Made for iPhone) hearing aids and sound processors and now AirPods help you communicate even in noisy environments. Just enable the function “Live listening” and bring your iPhone closer to the person you’re talking to. This feature uses the microphone to help you hear what is being said.

But there are other use cases too Of hearing – and they are no longer so harmless.

If you have AirPods, you can activate the Hearing and leave your phone in the room where the conversation is going on and listen to what they have to say from a distance.

This is of course illegal – and just morally ugly, so we encourage everyone to use Hearing only for its intended purpose.

♥ BY TOPIC: How to control an iPhone by turning your head.

How to turn on Hearing Mode on iPhone and turn a smartphone with AirPods into a spy device

1. Add a function Hearing in IOS Control Center… For this:

Open the app Settings and go to section Command centre…

2. Click “+” next to item Hearing (The blue human ear icon is located at the bottom of the screen).

3. Place AirPods in your ears, open Control Center, and tap on the hearing icon. Next, you should hear a sound notification that the function is activated.

4. To hear the clearest possible sound from AirPods, place your iPhone near the sound source with the bottom of your smartphone (where the microphone is located) closest to it.

Helpful advice: do not forget that you cannot move too far from the smartphone, because range is determined by Bluetooth technology.

See also:

[ad_2]

How to restart AirPods Max or reset to factory settings

17/01/2021 by ALOK DAS

[ad_1]

Most issues with AirPods Max on-ear headphones can be resolved by restarting or resetting to factory settings. But not all users know how this is done on this Apple device. In our short guide, we’ll give the necessary instructions.

♥ BY TOPIC: How to add a voice alert when iPhone or iPad is charging.

Which is better – reset or reboot?

These concepts are similar, but they affect the device in different ways. But the essence of the differences is also not clear to everyone. Restarting AirPods Max is the same as restarting any other device, such as an iPhone or Mac. This procedure clears the RAM of the device and reloads its software with custom settings.

A hard reset is more drastic, but should help with just about any issue bothering your AirPods Max. If a restart does not help, or you decide to return the headphones or sell them, then it is better to reset it. Apple claims that this procedure will erase your current settings, disconnect the AirPods Max from your iCloud account and all of your devices, and reboot to factory settings.

♥ BY TOPIC: How to teach iPhone to automatically turn on Power Saving Mode.

How to reset or reset your AirPods Max?

You can either reboot your AirPods Max, which will keep the previous pairings and your settings, or you can reset the device, which will unlink it from your iCloud account and reset it to factory settings.

How do I restart AirPods Max?

If you’re having trouble with your AirPods Max, you can do a quick restart using the noise canceling control button and the Digital Crown.

1. Be sure to charge your AirPods Max for at least a few minutes before restarting them.

2. Press and hold the noise canceling button and Digital Crown together until the LED indicator flashes amber.

3. Release the buttons.

If you find it difficult to find the buttons you want, the noise canceling button and Digital Crown are located at the top of the left earpiece.

♥ BY TOPIC: Tap iPhone Cover – Take a screenshot: How to bind actions to tap on the back of an iPhone.

How to factory reset AirPods Max?

If restarting your AirPods Max didn’t fix the problem, you should try resetting your AirPods Max to factory settings. This will disconnect the device from your iCloud account.

Let’s reiterate the need to charge the AirPods Max before resetting them to avoid additional problems. An unpredictable situation may arise if the headphones are suddenly discharged during the procedure. When your AirPods Max battery reaches twenty, ten, and five percent, you’ll receive a notification on the screen of your iOS device and hear a beep in your headphones.

1. Be sure to charge your AirPods Max for at least a few minutes.

2. Simultaneously press and hold the Squelch button and Digital Crown together for about 15 seconds until the LED flashes amber and then white.

3. The buttons can now be released.

This procedure will disconnect the headphones from your iCloud account and reset them to factory settings. Once you’ve reset your AirPods Max, you can reconnect them by removing them from your smart case and holding them next to your iPhone, iPad, or Mac until a setup animation appears.

You can also manually pair your AirPods Max by going to Bluetooth settings.

See also:

[ad_2]

What happens to AirPods after two to three years of active use

15/01/2021 by ALOK DAS

[ad_1]

There is no doubt that AirPods are a trendy and modern accessory. Even in a rapidly changing fashion, this headset is considered top-end. Since the introduction of AirPods, a huge amount of owner reviews have accumulated on the market, thanks to which you can evaluate the durability and quality of the device. How will AirPods (the same applies to AirPods Pro) change over time?

♥ BY TOPIC: Birthdays on iPhone, iPad and Mac: How to add and turn on reminders.

It’s only wine that gets better over time, and even then – not always. Electronics, on the other hand, is gradually deteriorating, reducing its nominal characteristics. Here are some observations from using the headset.

AirPods battery (significantly reduced battery life)

The operation and perception of many modern gadgets is directly related to their batteries. Autonomy is one of the key characteristics of such devices. Over time, batteries lose their capacity, AirPods are no exception in this matter. Initially, the headphones can work stably for the promised 5 hours on a single charge, clearly surpassing almost all competitors in this indicator. The first six months of use, everything will be exactly like that, besides, an additional 20 hours of work can be provided by the charging case.

In the third year, the situation will worsen even more. Headphones in the previous operating mode have been serving for less than two hours – we can talk about the loss of half of the battery capacity. The battery is discharging right before our eyes. In addition, in many cases, the headphones are not discharged synchronously at all.

♥ BY TOPIC: Why you need to use the “Sign in with Apple” function for authorization in applications and websites.

Clogged AirPods

AirPods have one problem that doesn’t get resolved over time – you have to be prepared for it. The white glossy headset case constantly attracts dirt, although it is not among the debris. Interestingly, the headset itself looks almost perfect over time. The case accumulates dust and dirt in itself, which will clearly be unpleasant for most users. On the inside of the case, even a dark coating forms, which eats into plastic – it is quite difficult to remove it with a simple wipe.

However, there are simple ways to quickly get rid of dirt on your case. For example, you can take cotton swabs or pads, soak them in nail polish remover, and then wipe any dirty areas. This will help remove major stains from the plastic. The case will look good, even if it gets scuffed over time.

You can also use an alternative method:

In the meantime, there is no need to know about it. ”

♥ BY TOPIC: How to remove scratches and restore shine to the steel frame of iPhone X, iPhone XS, and iPhone 11 Pro.

The case is lost

Surprisingly, losing a case is easier than one small earpiece. Nevertheless, the headset sits perfectly in the ears and the earpiece can fall out only if you accidentally hook it with your hand. But forgetting a case somewhere, empty or with contents, turns out to be quite simple – the compact case plays a cruel joke here. With AirPods Pro, this problem will clearly occur less often due to the increased size and weight of the case. Once in his pocket, he will not let himself be forgotten.

A lost kit is an offensive situation, you will have to remember where the AirPods went. And technical solutions will not help here. The headset appears in Find Find, but it requires a network connection, and this can only be done using the iPhone. When paired with another smartphone, the AirPods will be reset, which removes their binding to the previous device.

♥ BY TOPIC: How to save a website page in Safari on iPhone (iPad) for reading without the Internet: 5 ways.

Connection problems (sometimes one earbud will not connect)

There is another unpleasant moment that sometimes begins to manifest itself after several years of using AirPods – only one earphone is connected to the smartphone. The second, because of this, must be placed back in the case, and then inserted back into the ear. According to user reviews, the right earpiece most often suffers from this behavior for some reason. Neither resetting the headphones, nor re-pairing, nor updating the iOS firmware helps. But there is one tip – when placing AirPods in a case, make sure that the LED blinks once. If not, take out the headphones and put them back in.

♥ BY TOPIC: Why you need to disable iCloud backups for most iPhone and iPad users.

The sound remains high quality

Despite all the problems that accumulate over time, the sound of AirPods remains high quality. There is no difference in sound between a new headset and a used one for 3 years. The volume is reduced slightly, but the light bass and clear vocals are still in place.

♥ BY TOPIC: How to quickly translate sites (web pages) in Safari on iPhone and iPad: 3 ways.

Do not forget about the warranty (headphones can be replaced with new ones)!

Few people think that the problems that have appeared over a couple of years of using AirPods can be solved very simply and effectively – by changing the headphones to new ones. Apple’s warranty is 1 year, and besides, the consumer protection law “throws in” the same period, provided that the headphones were purchased from “officials” (for example, here). As a result, a well-founded complaint about the deterioration of the officially purchased device must be satisfied by replacing it. And this is not a fantasy scenario at all – many users do just that.

♥ BY TOPIC: The File Manager for iPhone and iPad, As It Should Be: Documents Review by Readdle.

How long does AirPods last?

It is safe to say that AirPods more or less retain their properties for about three to four years. Further, due to the loss of battery capacity, problems will begin, even if the sound remains clear. But there is already a replacement and it seems obvious – the new AirPods Pro are devoid of some of the shortcomings of the first model. However, the price drop for the first generation AirPods also makes them a good choice. The proven model will not bring surprises. And there are hardly any analogues on the market, whose properties will obviously not deteriorate in 3 years.

See also:

[ad_2]

How to set up (change) gesture commands for AirPods

05/01/2021 by ALOK DAS

[ad_1]

Probably, the owners of the first Apple AirPods wireless headphones still remember that the settings offered a minimum of commands to control the accessory – by double-tap on the left / right earphone, Siri was launched, the music turned on and off. But over time, the list of available actions has expanded significantly.

♥ BY TOPIC: AirPods Pro and water resistance: what is IPX4 water resistance and can you swim in them?

Double-tapping the AirPods will now trigger one of the following:

Siri activation;
Play / Pause;
Next song;
Previous song;
Disconnect headphones.

♥ BY TOPIC: How to pause playback in AirPods: 4 ways.

How to set up a specific shortcut for the left or right earbud

First, make sure your AirPods are connected to your iPhone. This is very important – without a connection, you will not see the required option in the settings. So just put on your AirPods and wait for the sound to indicate the connection to your smartphone.

After the AirPods are connected, go to the app Settings iPhone and select the section Bluetooth…

Then click on the icon “I” next to AirPods.

In the menu that opens, you will be asked to select a double-tap action for the left and right headphones.

For example, you can put the Start / Pause command on the left earphone, and the next track on the right one.

Done! Now it’s even more convenient to control your headphones.

Useful advice. After the next iOS update on your device, look into the AirPods settings section – Apple will certainly continue to add new gesture commands to the system. And there is something to add – for example, it would be great to quickly adjust the volume by swiping your finger across the earphone from bottom to top (to increase) or from top to bottom (to decrease).

See also:

[ad_2]

AirPods Max review: Apple headphones for 63,000 rubles – everything you need to know

12/12/2020 by ALOK DAS

[ad_1]

At the end of 2020, Apple managed to please its fans with another major announcement. For a long time, there were rumors that the company would sooner or later introduce the first full-size noise canceling headphones. Finally, they were presented.

♥ BY TOPIC: Which Smartphone Has the Best Camera in 2020 – Top 15.

AirPods Max colors

AirPods Max are available in five colors: silver, blue, gray, green, and pink.

♥ BY TOPIC: iPhone new, demo or refurbished (ref, CPO, like new) – how to check by model number.

AirPods Max design

The manufacturer claims that the headphones received a non-standard design for acoustic solutions. From the ear cushions to the headband, AirPods Max has been engineered to fit perfectly to your head, no matter your shape. This approach helps to achieve high-quality and rich sound. The sound itself comes from 40mm drivers that deliver rich and deep bass, accurate midrange and clear highs. Thus, the ability to hear every note is achieved, which will delight audiophiles.

Traditionally, Apple has paid a lot of attention to the design of its device – it should be cool, both in terms of features and appearance. The upper part of the headband is made of breathable mesh fabric. It allows you to evenly distribute the weight of the headphones so that they do not press on your head at only one point. The arms themselves are made of durable stainless steel, but covered with soft material. Thus, the headband is strong, flexible and comfortable.

The telescopic arms can be pulled out smoothly and securely locked in a user-selected position. Thus, you can achieve the most comfortable positioning of the headphones on the head and their firm fit to the ears.

The ear cups themselves are made of anodized aluminum. They received a unique mechanism that allows them to rotate independently of each other and thereby correctly distribute the pressure. The inside of the ear cushions is covered with a soft mesh fabric. This foam has a memory effect and covers the entire ear, providing the required sound insulation.

It is interesting that the ear pads themselves are also removable and attached with magnets – their replacement will not cause difficulties. A replaceable pair costs 7 490 rubles.

Inside the headphones there are drivers with two ring neodymium magnets, the principle of operation of which is similar to that implemented in professional floor-standing speakers. This design minimizes harmonic distortion. Even at high volume, the device will produce clear sound. Each earbud has a powerful 10-core Apple H1 chip. It helps to process audio and cut out external noise by adjusting the sound to the position of the headphones and their fit. This is how the adaptive equalizer is implemented. AirPods Max can deliver spatial audio based on dynamic head tracking.

♥ BY TOPIC: How to display photos or videos from iPhone or iPad to TV – 4 ways.

Charging and autonomy AirPods Max

AirPods Max headphones will be able to work autonomously for up to 20 hours, but they are charged not through the universal USB-C, but through the proprietary Lightning connector. A quick five-minute recharge will already allow the headphones to work for an hour and a half.

In addition, Apple offers to purchase an additional 1.2-meter Lightning cable – 3.5 mm for a wired connection of the device for 3,590 rubles. In this case, it must be noted that the headphones must be charged.

♥ BY TOPIC: IPhone geolocation settings: what do they affect and which can be turned off to save battery power?

How to control AirPods Max

In addition, with AirPods Max, you can see the features familiar to the line: adaptive equalizer, transparency mode, spatial sound and sound sharing. But there is also an element from the Apple Watch in the headphones – the Digital Crown. It is located on the right earpiece.

Thanks to the wheel, you can precisely control the volume by increasing or decreasing it, pause and start playback (single press), skip tracks (two clicks – next track, three clicks – return to the previous one) answer or end phone calls (single press) and call Siri (long press). There is a separate button next to the Digital Crown to switch between transparency and noise reduction modes. Transparent mode allows you to hear surrounding sounds and communicate with people around you.

As soon as you remove the AirPods Max from your head, playback stops. And when you place the device back, the sound resumes. A set of sensors is responsible for this: an accelerometer, a position sensor, a case detection sensor and a gyroscope. Apple has developed a Smart Case specifically for this device. When placed in it, the headphones do not turn off, but go into a low power mode.

Expect other manufacturers to create a hard case for AirPods Max in the future.

Noise cancellation in AirPods Max is a highly requested feature. Apple, like other leading audio manufacturers, is trying to remove external sounds. This is aided by six outward-facing microphones, with a couple more inward.

Location of the noise canceling button in AirPods Max:

They capture the sounds we hear, helping to form the required sound map and not be distracted. Apple claims the AirPods Max handles audio calls well even in windy conditions with directional microphones. The ninth microphone is responsible for voice and command recognition for Siri.

♥ BY TOPIC: Which iPhone holds the battery better? Comparison of battery life of all current iPhones in 2020.

AirPods Max price

For Apple, entering the premium audio market is a bold move. Competitors like Sony, AKG, Bose, Sennheiser are traditionally strong and have years of experience and a long list of successful products. And the price of Apple headphones surpasses most of its counterparts, perhaps the impulse of the AirPods and AirPods Pro, which dominate their segment, will play a role.

In official retail, the device will cost 62,990 rubles. It is difficult to say whether Apple will be able to achieve the sound quality corresponding to the price, especially since it is still offered to work with the AAC codec. But the market considers LDAC to be a much better solution. AirPods Max wireless connectivity is provided by Bluetooth 5.0.

The manufacturer is probably counting on a synergy effect, because AirPods Max, like AirPods and some Beats products, can switch between iPhone, iPad and Mac depending on which device is currently in use. The earbuds are compatible with Apple devices starting with the first generation iPhone SE, 7th generation iPod, iPad mini 4, all Apple Watch, Apple TV 4K and Mac released after 2012.

♥ BY TOPIC: 20 iPhone features that can be disabled for most users

AirPods Max Package Contents

AirPods Max Headphones
Smart Case
Lightning to USB-C cable
Documentation

♥ BY TOPIC: How to make and install a ringtone (ringtone) on any iPhone without a computer right on the device?

Everything you need to know about AirPods Max?

How do I turn off AirPods Max? Physical buttons Inclusions or Shutdown AirPods Max earbuds don’t have. The button on one of the headphones is responsible for enabling switching from active noise cancellation to Transparent mode or vice versa. In order to preserve the maximum power of the headphones when they are not in use, they must be placed in the Smart Case. In the case, the power consumption of the headphones is reduced to a minimum.

How to change ear pads on AirPods Max? The ear cushions are magnetically attached. To remove, simply grasp the edge of the ear cushion and pull with a little force.

Are the AirPods Max waterproof? No! Unlike the AirPods Pro, the AirPods Max are not sweat and water resistant. This means that you should definitely avoid getting them wet in the rain.

Will AirPods Max work with Android? The earbuds will work with Android devices, however, with some restrictions. Don’t expect support for spatial audio or Siri, for example.

Does AirPods Max support gestures (touch) like regular AirPods? No. Headphones are controlled using the Digital Crown:

Turn to adjust the volume;
Press once to start or pause playback or answer a call;
Press twice to skip to the next track;
Press three times to return to the previous track;
Press and hold to summon Siri;
Squelch control button.

In addition, the squelch control button switches from active squelch to Transparent mode or vice versa.

Does AirPods Max support wireless charging? No. Charging is done using the Lightning to USB-C cable only.

Can AirPods Max be used as wired headphones? Yes AirPods Max optionally supports 3.5mm audio cable (Lightning to 3.5mm). However, the headphones will not work passively, i.e. without charge.

In the meantime, there is no need to know about it. ”

See also:

[ad_2]

AirPods connect to iPhone (or other device) by themselves, how to fix

25/10/2020 by ALOK DAS

[ad_1]

And while AirPods are essentially wireless earbuds, the device gets an unprecedented level of support from the manufacturer. The possibilities of working with the headset are constantly expanding, and the attention paid to the accessory can be compared to the attitude to the Apple Watch or even the iPhone.

Apple periodically releases firmware updates to its headphones that open up new features to them. At the same time, what is interesting, the innovations turn out to be specific and really bring benefits. But not all users delve into the essence of the functions offered to them, simply ignoring them.

♥ BY TOPIC: How to add a voice alert when iPhone or iPad is charging.

For example, with the release of iOS 14, AirPods were able to switch playback between different devices. This feature allows the headphones to automatically select which of the ecosystem devices linked by the same iCloud account and located nearby to receive audio from each other. This will allow, for example, to talk on the phone, where AirPods will act as a headset for the iPhone, and after the conversation is over, start listening to music on the iPad. The switching will be done automatically by the headphones themselves. Below we will tell you how to disable or enable this feature.

♥ BY TOPIC: Themes for iPhone (new icons): how to change, where to download, how to make money on it.

The AirPods themselves connect to the phone at the moment when they are already connected to another device, how to fix?

Not everyone will be happy if their AirPods suddenly start switching from one device to another. In such a situation, it is better to disable the function altogether.

1. Connect your AirPods to iPhone.

2. Open the standard application “Settings“And go to the section Bluetooth… In the list of devices, find the connected AirPods and in front of them click on the circle with the letter “I”…

3. In the headset properties window, go to the “Conn. to this iPhone“.

4. Activate the parameter “Next time you connect to this iPhone“.

After that, AirPods will no longer try to automatically switch to your neighboring device. This option is suitable for those who use several gadgets at once, but do not want to output their sound to headphones. Often a similar situation occurs in a family when devices are shared by several people. Parents can work on a Mac, and children can play on an iPad or watch a movie on an Apple TV. The constant switching from device to device can literally drive the AirPods user crazy.

♥ BY TOPIC: How to teach iPhone to automatically turn on Power Saving Mode.

How to activate automatic AirPods connection between your devices

If the function of automatic switching of the playback source may be needed, then you can activate it as follows:

1. Connect AirPods to iPhone.

2. Now go to “Settings“And open the section Bluetooth… In the list of devices, find the connected AirPods and in front of them click on the circle with the letter “i“.

3. In the headset properties window, scroll down and go to the “Conn. to this iPhone“.

4. Select the “Automatically», Which will make the automatic switching function active.

The next time an event occurs that triggers the switching algorithm, a system message will appear on the screen of the device originally paired with AirPods. It will notify you that the headset has switched to another device and is now broadcasting audio from it. Synchronization with another device is very fast, but this action can be done in time and canceled by simply clicking on the blue button with an arrow in a circle in the notification. In this case, AirPods will remain connected to their native device, and the switch will not occur.

Please note that on Mac this feature will only work with macOS Big Sur.

See also:

[ad_2]

How do I clean my AirPods Pro or AirPods properly and can I rinse with water? Apple instructions

10/10/2020 by ALOK DAS

[ad_1]

Over time, any in-ear headphones require cleaning from the owner. How to do this correctly so as not to damage the device and remove accumulated dirt from it? Here are some tips for cleaning AirPods and AirPods Pro and EarPods.

♥ BY TOPIC: How to make and install a ringtone (ringtone) on any iPhone without a computer right on the device?

How to clean AirPods Pro and AirPods

1. Do not rinse AirPods or AirPods Pro with direct water flow.

2. For wiping, you need a soft dry lint-free fabric.

3. If AirPods or AirPods Pro have been previously treated with substances that cause stains or other damage (soap, shampoo, hair care products, lotions, perfumes, solvents, cleansers, acids and products containing them, insect repellents, sunscreens, vegetable oils or hair dyes), the following steps must be taken:

First, wipe the headphones clean with a cloth slightly moistened with clean water and then with a soft, dry, lint-free cloth.
Allow the device to dry completely before placing it in the charging case.
Do not use headphones until they are completely dry.

4. Make sure no liquid gets into the holes.

5. Clean the microphone and speaker grids with a dry cotton swab.

6. No sharp objects or abrasive materials should be used when cleaning AirPods or AirPods Pro.

♥ BY TOPIC: 20 iPhone features that can be disabled for most users

How to clean AirPods Pro earbuds

1. Water may collect in the liner. Then knock your AirPod on soft, dry and lint-free cloth… In this case, the opening of the insert must point downward so that the water can escape out.

2. Remove the earbuds from each AirPod and rinse them under water. Do not use soap or other household detergents.

3. Then wipe the earbuds with a soft, dry, lint-free cloth. And make sure they are completely dry before placing them back on AirPods.

♥ BY TOPIC: Noise Canceling and Permeability (Open Headphones) in AirPods Pro: What It Is and How to Switch Between Modes.

How to clean the AirPods and AirPods Pro case

Over time, not only the headphones, but also the charging case get dirty. It also requires careful handling. The case should be cleaned with a soft, dry, lint-free cloth. If necessary, you can slightly dampen a cloth with isopropyl alcohol. You should first make sure there is no moisture in the charging ports.

Here are some more helpful tips:

To remove dirt from the Lightning connector, use clean and dry soft brush.
Do not use any abrasive materials when cleaning the charging case.

♥ BY TOPIC: How to check if you bought a new iPhone (activated or not)?

Water protection in AirPods and AirPods Pro: what you need to know

AirPods Pro have received water protection, but they should not be considered waterproof. What’s more, the Wireless Charging Case for AirPods Pro is not waterproof at all, nor is it liquid-proof. This is why water entering the device holes can be fatal. If contact with liquid does occur, then immediately dry the case. To do this, turn it upside down and open the lid.

AirPods 1st or 2nd generation are not water-resistant for the headphones themselves and their charging case. Avoid getting liquid into any openings of the device. If this happens, even with sweat during training, then AirPods should be wiped with a dry microfiber cloth. To dry the case, open and turn it over.

If, after getting inside moisture, the earphone stops working and drying does not help, you will have to order a replacement.

♥ BY TOPIC: New gestures in iOS for working with text on iPhone and iPad that you might not know about.

How to clean wired EarPods

Do not rinse EarPods under water.
You will need a dry, soft, lint-free cloth to wipe.
Make sure there is no moisture in the holes.
You will need a dry cotton swab to clean the microphone and speaker mesh. Dirt from the screens can be removed with a dry soft brush.
Do not use sharp objects or abrasive materials to clean the EarPods.

See also:

[ad_2]

AirPods Pro and water resistance: what is IPX4 water resistance and can you swim in them?

07/10/2020 by ALOK DAS

[ad_1]

During the announcement of the AirPods Pro, costing 18,000 rubles, Apple emphasized the presence of the IPX4 waterproof class. However, don’t rush to dive and swim with these wireless earbuds.

♥ BY TOPIC: IPhone 11 and iPhone 11 Pro water resistance: can you shoot underwater and swim?

It’s important to note that the first and second generation AirPods didn’t have water resistance at all. While some runners and other athletes have almost certainly used the headphones in the rain or in high humidity conditions, Apple makes no direct guarantee that devices will work in such conditions. But for the newer Apple Watch and iPhone models, AirPods users are left alone with their problem if liquid gets inside their wireless headphones.

ON THIS TOPIC: Apple Watch Series 6, SE, 5, 4, 3, 2, 1 water resistance: can you swim and what you need to know.

Can I swim with AirPods Pro?

AirPods Pro are the first AirPods to be water resistant. It is no coincidence that Apple emphasized their compliance with the IPX4 class. But what does it mean?

The IP classes are a rating system published by the International Electrotechnical Commission (IEC). Experts determine the degree of protection of the body of an electrical device from the penetration of everything: from solid objects (including body parts) to dust and water. The class is intended to provide companies and consumers with a clear idea of what companies mean when they use the term “water resistance”.

In our case, IPX4 means the AirPods Pro are splash-resistant. According to IEC:

Splashes falling on the hull from any direction should not have any harmful effect using: a) an oscillating device; b) spray nozzle.

Test a) is carried out for 10 minutes; b) is carried out without a protective screen for at least 5 minutes.

In other words, you can’t swim with AirPods Pro… But if you get caught in the rain or even a heavy downpour, or under the spray from a car passing by in a puddle, nothing will happen to the headphones. Is that enough for you, or do you need more water protection than the IPX4 rating suggests?

Share your thoughts in the comments.

AirPods Pro review

See also:

[ad_2]

Satechi Trio Wireless Charging Pad – wireless charging station for iPhone, Apple Watch and AirPods

30/09/2020 by ALOK DAS

[ad_1]

The minimum number of wires and accessories on the modern person’s desktop speaks of his desire to keep up with trends and use the most effective solutions. From this point of view, a single docking station for all mobile gadgets immediately looks like a very laconic solution to the problem of discharged batteries.

When Apple first announced in 2017 and then changed its mind about producing a universal station for wireless charging of mobile devices of its own production, many users turned their gaze to the east, where Chinese craftsmen immediately presented several of their own variations on the Apple AirPower theme. However, the very first reviews of the crafts there disappointed and scared away all potential customers – inexpensive mass-market stations overheated the devices, quickly stopped working and did not support the simultaneous charging of three gadgets (smartphone, watch, headphones).

In the spring of 2020, rumors reappeared about a ready-made prototype of the real Apple AirPower, which should be presented to the general public closer to the beginning of 2021. However, this was not without disappointment – according to the source, the retail price of the accessory should be about $ 250, which is several times higher than the cost of popular solutions from other well-known vendors. Nevertheless, there is still good news for the owners of apple gadgets.

Satechi Trio Wireless Charging Pad

The product developed by the American company Satechi is a single universal docking station for simultaneous (of course, you can separately) charge Apple AirPods, Apple Watch and iPhone smart watches (or other smartphones with support for Qi wireless charging). Thanks to fast charging technology, the battery charge of all three gadgets can be restored in a minimum period of time.

Design

The Trio Wireless Charging Pad is a thin platform with a slight slope, the top panel of which is made of hard matte plastic. The iPhone charging slot has a rubberized ring. The charger for Apple Watch can be lifted up to 90%.

Trio Wireless Charging Pad is equipped with three LED indicators, each of which indicates the charging of the device in the corresponding section. This arrangement of the LEDs allows you to determine the active charging process when viewed from above and does not shine into the user’s eyes at night if the device is located near the bed.

A wireless charging pad will help minimize extra cables on your desk, while a sleek, minimal design adds personality to any décor.

Functional

The 25-watt Trio Wireless Charging Pad is capable of providing simultaneous fast charging iPhone (7.5W), AirPods (5W max) and Apple Watch (2.5W max). In this case, devices can be clothed in thin protective cases (up to 5 mm) without metal elements and pockets for credit cards.

The Apple Watch charger supports Night Mode and also lets you charge your device on a flat surface. Trio Wireless Charging Pad supports charging all versions of Apple Watch.

Slot for iPhone (all iPhones are supported starting from iPhone 8), of course, can also be used to charge smartphones from other manufacturers if the Qi standard is supported. In addition, the slot for AirPods can be used to charge any headphones that are suitable for voltage, or to restore the battery charge of another smartphone, but at the same time charging will last longer.

We tested real-world charging speeds with Apple Watch, iPhone 11 Pro, and AirPods Pro. All three devices were charged at the same time. Apple Watch charging speed was 0.5% per minute. The iPhone charged at 0.35% per minute, while AirPods charged 0.85% per minute.

Safety

The main difference between this station and budget counterparts is the presence of intelligent protective systems that prevent excessive heating of the devices on the basis, although some heating within the permissible limits is inevitable due to the use of wireless induction charging. In addition, the Trio Wireless Charging Pad automatically detects foreign objects at the base and turns off the power in accordance with safety regulations.

Equipment

The Trio Wireless Charging Pad is supplied completely ready for use, connected to a power source using a 40-inch (about a meter) complete USB Type-C cable and a 24-watt power adapter.

Buy Trio Wireless Charging Pad

In the meantime, there is no need to worry about it. ”

See also:

How to charge Apple Watch from iPad Pro or MacBook: Satechi dock overview.

[ad_2]

Spatial audio in AirPods: how to turn on and check the sound (+ audio test)

29/09/2020 by ALOK DAS

[ad_1]

At its summer WWDC 2020 presentation, Apple put a special emphasis on the new announced features of the AirPods Pro wireless headphones, of which Spatial Audio was the most intriguing. This software development should provide users with the ability to watch videos and listen to music with a realistic immersion effect without special equipment.

♥ BY TOPIC: 20 iPhone features that can be disabled for most users

What is Spatial Audio in AirPods Pro?

The developers themselves compare the user experience when listening to audio content in surround sound mode with going to the cinema – surround sound comes from all directions at the same time and changes with every movement of the user’s head relative to the parent device (iPhone, iPad, Apple TV, etc.). And this is a really useful feature, giving you new sensations that are easily distinguishable from conventional stereo and even 5.1 surround sound.

♥ BY TOPIC: Translate to iPhone: How to use the built-in Translate in iOS.

How does Spatial Audio work in AirPods Pro?

To create this effect, Apple uses special software technologies that use the device’s accelerometer and gyroscope to create a kind of sound field, inside which the user’s head and gadget are located. This creates the feeling that instead of two headphones (as in ordinary stereo mode), the listener receives waves from a multitude of virtual sources placed around them, as a result of which even watching a movie on a smartphone can become a powerful alternative to going to the cinema.

♥ BY TOPIC: How to download a video from VK (VKontakte) to an iPhone or iPad and watch without the Internet.

What devices support Spatial Audio?

The feature is only available to owners of top-end AirPods Pro, and support is also expected for AirPods Studio, which may launch in the fall of 2020.

Spatial Audio requires iOS 14 or iPadOS 14 or later. In addition, the AirPods Pro themselves must be updated to the latest firmware. Please note that AirPods Pro firmware updates automatically while charging.

♥ BY TOPIC: Hidden correspondence on iPhone: how to create a secret chat without using instant messengers.

How do I enable spatial audio in AirPods Pro?

There are two ways to activate the function:

1. Follow the path: “Settings” → “Bluetooth” → “AirPods Pro” and set the switch “Spatial Audio” into position Included…

2. Open Control Center, press and hold the volume slider, and then tap the corresponding icon.

♥ BY TOPIC: Tap on iPhone Cover – Take a screenshot: How to bind actions to tap on the back of an iPhone.

What formats does Spatial Audio support?

Naturally, not every video on YouTube or a movie downloaded from the CAMRip torrent can be watched in surround sound, this requires content with 1.5 or 1.7 surround sound, as well as Dolby Atmos.

The Spatial Audio feature in AirPods Pro was not in vain that it was separately noted as part of the June WWDC announcement and will certainly not only be massively used by Apple headphone owners, but also encourage content creators to record surround sound in appropriate formats. Thus, spatial audio can be added to the list of reasons to upgrade to a new version of iOS for those who have not yet done so.

♥ BY TOPIC: How to block all calls from unknown and hidden numbers on iPhone: 2 ways.

How to make a test (check) “Spatial Audio” by example?

Check out the Spatial Audio effect on AirPods Pro in the video below:

In the meantime, there is no need to worry about it. ”

See also:

[ad_2]

How to pause playback in AirPods: 4 ways

30/07/2020 by ALOK DAS

[ad_1]

AirPods are an extremely convenient accessory. It connects easily to iPhone, the charging case provides 24 hours of listening time, and you don’t have to worry about messing around with your headphone cables. AirPods also make it easy to pause your music, podcasts, and whatever else you’re listening to. Moreover, there are several ways to do this. Here’s how to pause your AirPods, regardless of which device they’re paired with.

♥ BY TOPIC: Translate to iPhone: How to use the built-in Translate in iOS.

4 ways to pause playback in AirPods

Remove any AirPod from your ear

This simple feature of AirPods can be considered one of the best. Just pull the headset out of your ear and you will pause audio playback. After you hear what you want, plug the headphones back into your ears and you will start the playback process again.

It’s an intuitive feature that quickly feels natural. It works equally well on both AirPods and AirPods Pro.

Your AirPods won’t pause music, podcasts, or any other apps if disabled “Auto-detect ear”… And if this method does not work in principle, then connect your AirPods to your iPhone or iPad and check the Bluetooth settings to enable the desired function.

Open the app “Settings” and go to section Bluetooth…
Click the button i next to AirPods.
Scroll down and turn on “Auto-detect ear”…

♥ BY TOPIC: How to turn off recommended contacts in the Share menu on iPhone or iPad.

Double-tap or use the pressure sensor to pause playback

You can use the sensors on your AirPods to control your music. Depending on your settings, these sensors may allow you to pause playback, activate Siri, or even skip to a different track.

On AirPods Pro, quickly squeeze the force sensor on the base of the earphone to pause music playback. Squeeze the stem again to start playing your music. If the press is too long, then you change the noise reduction mode instead of stopping.

On AirPods (2nd generation), double-tap the earbud while in your ear. This will pause the music playback. You can do this with the first generation AirPods, but by default, double-tapping there will activate Siri. Use a connected iPhone or iPad to change this behavior in the settings:

Open the app “Settings” and go to the Bluetooth section.
Click the button i next to AirPods.
In section “Double tap AirPods“ select the earpiece and then check the box next to the option “Play / Pause“…

♥ BY TOPIC: Picture-in-picture mode on iPhone: how to enable and use.

Ask Siri to pause music on your AirPods

You can ask Siri to perform a variety of tasks, including pausing music on your AirPods. If you have AirPods (2nd generation) or AirPods Pro, use “Hey Siri” and tell “Pause”… This will work with any audio content you listen to.

Alternatively, change the double-tap or press-and-hold settings for your AirPods and use the sensor to activate Siri. You can do this with a connected iPhone or iPad:

Open the app “Settings” and go to section Bluetooth…
Click the button i next to AirPods.
At the bottom where it says “Double tap AirPods” or “Press and hold AirPods”, press the left or right AirPod.
Select Siri from the list of functions to have your earphone activate Siri.

The first AirPods model does not work with “Hey Siri”, so you need to double-tap the AirPod to activate the assistant. This is the default double-tap feature on 1st generation AirPods.

♥ BY TOPIC: New in iOS 14: How to hide unwanted application pages from the home screen on iPhone and iPad.

Use the Pause button on the connected device

Sometimes the quickest and easiest way to pause music on AirPods is to use a device that’s connected to them. For example, if you’re using AirPods to listen to music while using another app on iPhone, you can use the smartphone itself to pause playback.

The fastest way to pause music playback on iPhone or iPad is to open Command centre… Swipe down from the top-right corner of the screen (or swipe up from the bottom of the screen if your iPhone has a Home button). Then click the Pause button in the playback section.

On Mac, you can press F8 on your keyboard to pause music or podcasts.

See also:

[ad_2]

Can I connect missing (stolen) AirPods to someone else’s iPhone? Will Apple protection work?

02/06/2020 by ALOK DAS

[ad_1]

Apple AirPods have already become something of a status symbol, thanks to its premium value and recognizable design. But such qualities of the gadget make it an attractive bait for potential kidnappers.

♥ BY TOPIC: What will happen to AirPods in two to three years of active use.

Obviously, AirPods are more vulnerable to theft than other Apple devices, because the device is not protected by iCloud Activation Lock. This means that an attacker can easily connect stolen AirPods to his device.

♥ BY TOPIC: How to check the battery power of your AirPods on iPhone, iPad, Apple Watch or Mac.

Lost (stolen) Airpods, is it possible to bind missing headphones to someone else’s iPhone?

If you lost or someone stole your AirPods, then it is not difficult to connect the headphones to another iPhone.

All that is required of the finder or attacker is to put both AirPods in the charging case and hold the settings button for a few seconds.

But the rightful owner of the device does exactly the same when resetting their settings to solve software problems.

After the reset procedure, your AirPods will no longer be tied to any of any Apple devices. There they can still be displayed in the settings, but this will not prevent the new owner from using the headset.

♥ BY TOPIC: How to teach iPhone to pronounce the name of the person who is calling you.

What should I do if my AirPods are stolen (lost), but I still have a case from them?

It may seem to you that the thief or finder will not be able to use your AirPods if you still have a charging case. This makes some sense, since the headphones must be placed in a case to connect them to another iPhone.

Nevertheless, it is quite possible to use any other case for AirPods for these purposes.

Headphones AirPods work with any case for charging, provided, of course, the compatibility of models. The case for the Pro model will only work with AirPods Pro.

Thus, if a thief has stolen your AirPods, you can still connect them to another iPhone just by using a different charging case. Perhaps a separate case stolen from someone else will be used for this.

♥ BY TOPIC: iPhone tracks all your movements (places visited): where to watch it and how to turn it off.

And if only one of a pair of AirPods headphones was stolen (lost)?

One earpiece from a pair of AirPods is certainly less useful to a thief than a pair. But if the offender stole a second earphone from someone, then you can pair the pair together to form a complete set and use it with a case for charging. The owner can only console himself by the fact that he can still listen to music with one remaining earpiece.

♥ BY TOPIC: How to download files, documents, videos and music to iPhone and iPad from the Internet.

Can I track stolen or lost AirPods?

application Locatorformerly known as Find iPhone is a very useful tool for tracking many of your missing Apple devices, including AirPods.

Open app Locator on a connected Apple device or open the section Find iPhone on iCloud.com. If your AirPods were connected to a device using Locator, you should see them on the list along with your other devices.

You can track AirPods when they have an active connection to one of your Apple devices. This happens when one or more of your AirPods is out of the case and located in the Bluetooth range of your device. Headphones must have a residual battery charge.

application Locator Marks the location of your AirPods on a map and plays sound as an aid to search. This will be useful if you lost your AirPods somewhere in the apartment or among the furniture, and not someone stole them. But this method can still help you find a thief in a small room.

If your AirPods are dead, then Locator shows only their last known location and offers no other tracking options.

♥ BY TOPIC: Which iPhone holds the battery better? Comparison of the battery life of all current iPhone in 2020.

Is it possible to block stolen (lost) AirPods?

On most Apple devices, such as iPhone, iPad, or Mac, you can use the app Locatorto block them when they go missing. This stops anyone who finds your device from setting it up and using it as their own.

Combined with an activation lock, this is a great way to scare away potential thieves, as using stolen Apple devices becomes an incredibly difficult task.

Unfortunately, none of these features are available for AirPods.

You cannot block missing AirPods or do anything to prevent the new owner from connecting them to your iPhone. Combined with the high price of the device and its lightness with compactness, this makes AirPods an attractive target for potential thieves.

♥ BY TOPIC: In which smartphone is the best camera in 2020 – Top 10.

Can I buy a left or right earphone and an AirPods charging case separately?

If someone stole your AirPods, the first thing you should do is report it to the police. If your home or property insurance affects AirPods, then you can use the police report when applying to the insurance company. Without insurance, you will have to pay to replace AirPods.

Fortunately, Apple offers a partial replacement service, so you can only replace separately the headphones or charging case that you are missing.

This service is not cheap, so having lost the whole set, it may be easier to buy new AirPods in the store.

♥ BY TOPIC: Photo of a contact when calling a full screen iPhone – how to make?

Apple AirPods replacement cost:

AirPods (1st or 2nd generation): from 5,000 rubles for each headphone

Case for wireless charging AirPods: from 6 000 rubles.

Case for charging AirPods: from 5 000 rubles.

♥ BY TOPIC: Raising to activate, or how to automatically turn on the iPhone screen when you pick it up.

Apple AirPods Pro replacement cost:

AirPods Pro: from 7,000 rubles for each earphone

AirPods Pro Charging Case: From 8,000 For Each Earphone

Silicone ear pads AirPods Pro: from 400 rubles per pair

You can order a replacement pair of AirPods online using the Apple Support website. To do this, you need to indicate the serial number of your AirPods, which you can find on the box printed on the AirPods case or on the page Basic → About This Device in the application Settings iPhone

See also:

[ad_2]

How to check the battery power of AirPods on iPhone, iPad, Apple Watch or Mac

01/06/2020 by ALOK DAS

[ad_1]

The AirPods are so comfortable that it’s easy to walk with them in your ears for several hours and not notice how they begin to discharge. Sometimes you need to check the percentage of battery power in the headset, so as not to be in a situation where an important call may unexpectedly fail due to disconnection of the device. Here’s how to check the battery power of your AirPods on iPhone, iPad, Apple Watch, and Mac.

♥ BY TOPIC: How to teach iPhone to pronounce the name of the person who is calling you.

Open AirPods Case Near iPhone or iPad

The easiest way to check the battery life of your AirPods or AirPods Pro is to open the device’s case next to an unlocked iPhone or iPad. On the device, you will see the AirPods pop-up connection panel. In addition to automatically connecting a smartphone or tablet to the headset, information will also be given on the battery level both in the headset and in the charging case.

If you need to know the battery life of an individual earphone from a pair of AirPods, then remove it and leave the other in a case.

♥ BY TOPIC: Useful Siri commands for iPhone in Russian.

Ask Siri on iPhone or iPad

But what if you are walking or jogging and don’t want to get your iPhone and open the AirPods case next to it? In fact, you can just ask Siri how much battery power is left in your AirPods. You can contact the voice assistant with AirPods, iPhone or iPad. Press and hold the side button (Power button) on the iPhone or iPad or double-click / double-click AirPods to call Siri.

Now say something like: “How much battery is left in the headphones?” or even something short like “AirPods Battery”.

Siri will calculate the battery life of AirPods or AirPods Pro and report the result.

♥ BY TOPIC: iPhone tracks all your movements (places visited): where to watch it and how to turn it off.

Add Battery Widget to iPhone or iPad

If you constantly use the widget panel on your iPhone or iPad, a widget will come in handy. “Batteries”to monitor the battery life of all devices connected to your Apple smartphone or tablet. On this panel, you will see your Apple Watch, AirPods, Bluetooth headphones, and even the battery life of an external mouse.

To add a widget “Batteries”, Swipe left on the iPhone or iPad home screen to open the widget screen “Today”. Now swipe down the bottom of the screen and press the button “Change”.

Now press the button with the sign Plus (+) next to the widget “Batteries”to add it to your list.

You can use the three-bar icons to rearrange the widgets and move them to the desired location. “Batteries”. When you’re done, click on the button Done.

Widget “Batteries” will now show battery life of connected AirPods or AirPods Pro.

♥ BY TOPIC: How to download files, documents, videos and music to iPhone and iPad from the Internet.

Use Control Center on Apple Watch

Your Apple Watch can show you the battery life of connected AirPods from “Control Center”.

To access the menu, swipe up from the bottom of the dial. It will open “Control point”. There, click on the percent battery icon.

Here, below the Apple Watch’s battery life, you’ll see the battery life of your AirPods.

But this method works if you connected AirPods directly to the Apple Watch or if they are connected to the iPhone that is connected to the Apple Watch.

♥ BY TOPIC: Which iPhone holds the battery better? Comparison of the battery life of all current iPhone in 2020.

Use the Bluetooth shortcut in the menu bar on a Mac

Mac users only need to go to the menu bar to see the battery life of their AirPods. After connecting AirPods, click Bluetooth in the menu bar.

After that, hover over AirPods in the drop-down menu. Here you can see the percentage of battery charge of your AirPods and their case.

See also:

[ad_2]

I compared the sound of AirPods Pro with forbidden firmware. And now it’s even a pity

02/03/2020 by ALOK DAS

[ad_1]

A week ago, I wrote that my AirPods Pro were overheated and broken. More precisely, one of the headphones.

A day later, they gave me a new earphone under warranty, and during this time I took another Pro.

The first thing I noticed is different sound quality of the freshly unpacked model. Such a difference does not happen out of the blue, and my suspicions were confirmed quickly.

Alas, this says one thing: buyers of all AirPods Pro after 20 December are forced to be content the wrong sound,

Now I have seen this myself.

What is the difference between the “old” and the recently purchased AirPods Pro

AirPods Pro firmware 2C54Unavailable for installation. Serial number 1 is a consequence of replacing one of the headphones in the service. The reader wrote about this here.

A firmware was installed on my broken AirPods Pro, which is no longer there: 2C54that appeared literally for three days and then disappeared without explanation.

The user does not have control over the AirPods update process: it installs itself without notice or warning.

AirPods Pro owners who bought headphones until December 18 last year, almost without exception managed to get a new version of software – 2C54.

AirPods Pro with firmware 2B588publicly available to date.

The 2C54 firmware changed the sound quality for the better compared to the previous one, 2B588. But, according to some, the power of the noise reduction effect has decreased.

Two months have passed since then. Apple did not comment on anything, did not release new firmware.

Sound comparisons should be treated with caution, because this is a subjective topic without special equipment. But I have two pairs of AirPods Pro on hand with both versions of the firmware.

Why not at least try?

I compared AirPods Pro with different firmware. The difference is instantly noticeable.

It’s good that in iOS 13 there was a suitable function – Share audio.

Thanks to her, I can simultaneously connect 2 pairs of different AirPods (or Beats) to one iPhone or iPad.

In my right ear I inserted an earpiece from the new AirPods Pro with firmware 2B588, and in my left ear from the old ones on the same 2C54. Well, that’s it, I started to launch different tracks.

You cannot turn on noise reduction in this mode, so both headphones played without effects.

The difference appeared instantly and in absolutely any tracks.

2B588: a murky middle, freshish high frequencies, the same blurry but powerful bass. In comparison, it seems that the headphone is clogged or the ear itself.

2C54: Weaker bass with less emphasis, but noticeably cleaner mid and high. And there is a strange feeling of lightness compared to the 2B588. As if they put less pressure on the brain, they sit better.

Total: 2C54 forces AirPods Pro sound cleaner and brighterthan 2B588, but the bass is weakening.

Decided to test and active noise reduction. To do this, I turned off the joint listening mode and put on different headphones without music in the Moscow metro.

I also had to turn on noise reduction for single headphones in the menu Universal access.

Surprise: 2B588 and 2C54 seem the same. I don’t notice any difference, as if I simply put a pair of headphones on one firmware. Everything that suppresses or misses the left, with the same success repeats the right.

The subjectivity of such a test does not allow us to say that in both versions the noise reduction is really the same. But the fact that I personally do not hear the difference is a fact.

In the end, I was surprised how significant the difference in sound quality is without a noticeable loss in noise reduction. This is not just “a little better,” but as if you are listening to two completely different models of headphones.

therefore firmware 2C54, IMHO, a clear winner. I do not consider the “soap” in 2B588 to be a plus, even taking into account the amplified bass.

And what to do with it?

It would be nice if Apple explained where the 2C54 went and whether it would appear again.

Buy AirPods Pro with this fleeting firmware today is possible only with hands, already used. I see no reason to intentionally do this. Still, 2B588 will not disappoint you, since there is nothing to compare it with.

But if you are not comfortable with the sound of “bugs” on a publicly available version, be aware: they can play much better. It remains to wait and hope that they will be allowed to do this again.

I found a way to connect AirPods most conveniently

15/01/2020 by ALOK DAS

[ad_1]

One reason to love AirPods is how delightfully simple they are to connect to the Apple gadget. Once set up, and then everything works by itself.

But there is one point. When you have several Apple devices, you may need to go into the widget to reconnect the headphones between them Music in Control room. Or tap on the sound source menu in Music or any other application.

So, I found there is a way to automate the process and not open any menus. AirPods will automatically connect to at least five iPhones exactly when you it will be needed.

It’s six in the morning in Moscow, so it’s a chaotic start, sorry. I will try to explain below.

The bottom line: AirPods will connect themselves to any device that you use

This is the curtain menu Control roomthat you don’t need to go into anymore.

So you have AirPods (or Beats). And several Apple mobile devices, the number does not matter. For example, suppose these are iPhone and iPad.

When you take out your AirPods from the case, they connect to the gadget that you used with the latest headphones. Let’s say it was an iPhone.

How to connect headphones to iPad? You open the curtain Control room, hold down the player’s widget menu, open the list of sound sources (icon Airplay) and select your AirPods there. Not very fast, though better than delving into the Bluetooth menu.

What method I suggest now: you intentionally do nothing. AirPods will reconnect themselves to the iPad, and then to the iPhone when needed.

In this pattern of iPhones and iPads, there can be at least five or ten. When you take anyone, you don’t have to check if AirPods are specifically connected to it – this will happen automatically.

Now it’s clearer? Hope so. Let’s go customize.

Getting ready to set it up once and everywhere.

We will use Teams. This application is already pre-installed with you, starting with iOS 12. If you uninstalled, download from the App Store again. There will be nothing complicated, I will give step-by-step instructions below.

What else do we need besides Teams:

► one, two or as many iPhone, iPad or iPod touch on iOS 13 and aboveconnected to your Apple ID account

► AirPods of any generation, including Pro; either BeatsX, Powerbeats3, Powerbeats Pro, Solo 3 Wireless, or Solo Pro.

► 1 minute to configure features in each device.

Alas, you can’t just download a ready-made setup. The created automation is tied specifically to your headphones and will not work for other users. Therefore, we do everything with pens, ourselves.

Instruction How to automate connecting AirPods to other iDevices

Make sure AirPods or Beats right now connected to the device with which to configure. Otherwise, point 5 will not work.

1. Open Teamsgo to the tab Automation.

Choose Create automation for yourself.

2. In the window, scroll down the list, tap on Open application.

Now click on Select opposite application.

3. Enter in the search box at the top the program with which you most often use headphones. If you use Apple Music and a built-in player, then write Music.

Any will do: Netflix, YouTube, Yandex.Music etc. You can select multiple applications at once. How to decide and select the necessary ones, click Done in the upper right corner.

4. Click Add actionthen Scripts.

In the list that opens closer to the end, we search and click on Set playback location.

5. In the window that appears, click on the iPhone (or iPad, or iPod).

See in the list your airpods (or beats)? Select them, then click. Further.

6. We are almost done. Now be sure to turn off the item Ask every time and confirm this in the warning window (Not ask) Tap on Done.

Nothing complicated, agree. Now repeat the entire instruction on other iDevices.

What we got as a result

When you open any application selected in automation (in our example Music in iOS) used device forcibly connects AirPods or Beats.

That is, they listened to music on an iPhone, then opened YouTube on an iPad, and AirPods themselves connected to the tablet. We watched the video on the iPad, took the iPhone and opened the player back – AirPods switched to the smartphone. Headphones were not removed, no menus were opened. Everything works by itself.

The lists of applications by which our automation is activated can be completely different on different gadgets. This allows you to customize the chip to your habits and usage scenarios.

Well, if you do not use AirPods and they are in the case, then they will not connect anywhere. Automation will not work, the sound will go either through the speakers or through other connected headphones.

It remains only to figure out how to do the same for the Mac. If I find a way, I’ll add it here later.

I have been with AirPods for 3 years. What changed

14/01/2020 by ALOK DAS

[ad_1]

This is my third year with AirPods, the most popular wireless headphones in the world.

They deservedly occupy half of the market due to their convenience and relative affordability. But this is a technique and, as is inherent in any gadget, over time everything only gets worse (expected). However, I did not expect Apple’s magic to completely disappear.

Here are a few conclusions that I have come to throughout my use.

They began to work noticeably less

The battery is the most painful part of any gadget. And AirPods this problem is not spared.

Earlier, the headphones worked stably for 5 hours a day, but now you can completely forget about this figure. In order, as I came to this.

First year. For the first six months, the headphones held the charge perfectly, the charging case gave them an additional 20 hours. As a result, in a week I charged the entire kit once. A decent result for the earphones? Undoubtedly.

I usually listen to music at 50-70% of the volume of the hour, 2-4 per day. In the subway, sometimes you have to increase it to 100% in order to hear normally what is happening in them. This is especially problematic in old trains that still travel on the green subway line.

Okay, so far so good. The next six months. Gradually, the volume had to be increased due to various trips not in the quietest vehicles. The volume began to increase more often, which negatively affected the battery capacity.

And now it starts to me to miss headphones for the whole day, you have to put them in the case in the late afternoon. The first bell that the battery began to discharge faster.

Second year. During this time, I noticed that at the same pace of listening to music, I began to miss the autonomy of the headphones.

They can withstand less than 5 days without recharging from the outlet, and this is still quite enough to use them comfortably. However, I had to use the case at least once a day. In rare cases, more often.

Toward the end of the second year, the headphones became discharge in 3 hours.

Third year. Now everything has become much worse than in the first year.

My headphones at about the same rhythm live LESS TWO HOURS. That is, they have lost more than half the capacity.

The battery is hidden before our eyes. Even now, while I am writing these lines, in 13 minutes the charge from 100% dropped to 88%. It is to pass along the gray metro line 8 stations from the outskirts.

The route to work takes about an hour. During this time, at least one earphone begins to signal a charge below 20%.

Why only one and not both? Different mode of use of “airpods”. It happens that I go with one earphone, and this is enough for me to listen to music lightly, but at the same time I hear what is happening around.

Case clogs constantly from scratch

Another problem that does not change over time. You just need to know about her.

The headphone case is constantly getting dirty, although I do not put it open in some cluttered areas. At the same time, the headphones themselves look like new – there are no complaints at all.

And here is the charging case constantly collects trash, dust and dirt. And this can not be avoided, even if you are incredible clean.

Moreover, a black coating forms on the inside of the case, which cannot be removed with an ordinary cloth. He literally eats into plastic.

Impressive advise you to be careful. Below is a photo of a dirty case, move the curtain:

But there is a fairly effective life hack, how to remove most of the raid.

1. Take cotton buds or discs.

2. Soak them lightly in nail polish remover. It is possible in alcohol-free.

3. Wipe dirty places for a couple of minutes.

Most of the stains you simply remove. The case will look good again, despite the wear and tear formed over time.

Losing a Case with AirPods is Much More Than One Earphone

Personally, my headphones fit perfectly in my ear. It is impossible to lose them individually, unless you accidentally hook them with your hand. I understand perfectly well that I am not alone in this, but there are people who are uncomfortable with such a landing, and the accessory will still fall out.

But that’s funny. It turned out to leave, forget, just lose the case with all the contents easy peasy. It was corny put it and forgot about its existence due to too compact body.

I think that with AirPods Pro this problem can go away. Externally, the cover has become larger and more noticeable. Plus heavier. If you put it in your jeans or jacket pocket, then you probably will not forget about it.

The problem with the loss of the whole set is the most offensive that can happen to you. Because then you can find it only from memory.

Just recently, only a friend complained about this:

In fact, then it will be unrealistic to find them. Yes, they are displayed in Latitude, but they need a network connection, and it only happens through the iPhone.

To pair with another iPhone, the headphones need to be reset so that they disappear from radar.

Headphones began to connect through time

This was not the case with the purchase, and over time it began to appear only more often.

Often only one earphone is connected to the iPhone, and the second have to rearrange in a case and then again in the ear. I don’t know how it is with you, but it is most often my right ear that “falls off”.

Resetting the headphones and pairing again does not help. I don’t know how to fix it, but updating the AirPods or iOS firmware does not save.

Only the sound is normal

The sound remained the same as it was 3 years ago. I am absolutely sure of this, because the other day I was listening to freshly bought headphones.

The only thing is that they have become a little quieter. But right just a little bit. Light bass, clean vocals and everything like that included.

There is nothing to add. All OK!

Alas, AirPods lasts for three years. Not more

In a good way, it’s time for me to change the headphones to new ones. I look in the direction of AirPods Pro, but so far there are some doubts.

I will definitely say that my next wireless headphones will be Airpods. They showed themselves well over the years, and I would continue to use them if the battery had not died.

But if you plan to take this accessory for a longer period, then I would think in your place.

Sony WF-1000XM3 vs AirPods Pro. Which are better?

19/12/2019 by ALOK DAS

[ad_1]

In July of this year, Sony introduced its best wireless headphones – WF-1000XM3 with noise reduction and a bunch of other bright chips.

Against this background, until then all the fully wireless headphones (TWS) that existed at once became … a pumpkin.

But in October, Apple introduced its answer – AirPods Pro. And a logical question arises. Which ones to buy?

My daily testing of these two models for a month proved: choosing the best is not so simple.

1. Headphone design and ergonomics

Sony WF-1000XM3 became a deep modernization of the WF-1000X that appeared a year earlier. Improvements touched a lot, but the ergonomics and fit remained the same.

Therefore, they require a thoughtful choice of ear cushions for a snug fit and can still interfere under the cap with their protruding body in which the battery is located.

AirPods Pro, on the contrary, received a design redesigned for the better, which can be considered a reference.

Although they belong to the class of intra-channel models, electronics placed in the “leg” much more convenient with constant and prolonged wear.

AirPods Pro also requires the selection of ear pads, but this process is actually automated in iOS.

Unfortunately, Apple’s wireless “flagship” is only available in white. But Sony offers the WF-1000XM3 in silver and black cases.

AirPods look pretty simple, so they fit any clothes, sometimes resembling a business headset. In addition, their appearance is recognizable and is a “fetish” of the masses.

The WF-1000XM3 has a restrained, rigorous design. At the same time, they are exposed from the ears stronger than AirPods.

Conclusion: Despite the reference appearance of Apple headphones, the Sony model provides better passive sound insulation and a more pleasant landing for the Russian climate. But the appearance of the AirPods Pro is more universal.

The score is 1: 1. Draw.

2. Case. Design, dimensions, practicality

Sony’s charging case measures 142 × 119 × 64 mm and weighs 79 grams. The AirPods case is noticeably smaller and lighter: only 45.5 × 21.7 × 60.6 mm and, accordingly, 45.6 grams. Therefore, the former significantly retract the pocket, and the latter are invisible and easily fit in any.

The Sony case is matte thanks to a rubberized coating that erases quite quickly and is covered with signs of use. The famous scratches of AirPods cases are also inherent in them.

However, if you take a light model, she hide scuffs and scratches better.

Legends can be made about the AirPods “box”: it has become a reference for hundreds of clones. And really comfortable. But the white color is impractical, any scratches and fingerprints of dirty hands are evident. And the plastic of this model has not changed since the first modification of branded wireless “ears”. Therefore, he collects defects very quickly.

The Pro-modification of the Apple headset finally has wireless charging. It’s a pity that they cannot be charged with the iPhone due to the lack of inverse wireless charging. But you don’t have to buy at least a separate station, as for watches – any compatible with the Qi standard will do.

Sony headphones only charge over the wire via USB Type-C, but they do it faster.

Conclusion: Apple engineers took into account the mistakes of past models and slightly ahead of Sony. Their case is smaller, more convenient. In addition, it can be purchased separately.

The score is 1: 2, a point in favor of AirPods Pro.

3. Connect to a smartphone

Connecting Sony to a smartphone as before requires intervention in the smartphone’s software menu. However, there is also the ability to quickly connect. a simple touch to the sound source thanks to the presence of an NFC-module without additional settings.

Both options are available for any software platform without restrictions: although noise reduction can only be activated on Android and iOS, they can play the main role in the desktop computer.

An original scheme with the participation of the Bluetooth 5.0 protocol is used for connection: each earphone occupies a full-fledged channel and interacts directly with the smartphone.

This reduces latency and eliminates possible malfunctions, therefore, compared to other TWS-headphones, the WF-1000XM3 show excellent connection stability. Just like AirPods Pro, also working on Bluetooth 5.0.

Apple AirPods in any modifications are connected automatically. Which, however, can be a more complicated process if the headphones need to be “moved” by connecting to a new device.

The H1 chip used for the hardware implementation of the headphones can be considered a reference. It is unlikely that a more stable compound can be found.

Conclusion: Although Apple has managed to release a better connection between the accessory and the smartphone, Sony is stepping on its heels. And attracts more versatility.

Score 2: 2, a point in favor of Sony.

4. Headphone control

Sony WF-1000XM3 is controlled by touch pads. Alas, capacitive technology leads to false positives in severe frost, and also does not like wet hands.

What’s more: the WF-1000XM3 will have phantom clicks from raindrops. On the other hand, the owner should make sure that the “ears” do not come in contact with moisture, since there is no moisture protection.

AirPods Pro playback control is implemented using familiar “stalks” where more responsive and loyal to the owner.

Both models offer independent control of the headphones – both the left and right headphones can be used as a single headset.

Conclusion: Managing the AirPods Pro was easier than the Sony WF-1000XM3. Physical pressing, albeit virtual, is always more reliable and convenient than just touch panels.

Score 2: 3, a point in favor of Apple AirPods Pro.

5. Smartphone application

Convenience of the application for wireless headphones Sony Headphones Connect We have repeatedly noted in our reviews. Perhaps this is the most thoughtful and functional program among all competitors.

It explains how to use active noise reduction and allows you to activate it in a couple of clicks after individual settings.

A good equalizer and switching noise reduction modes are also available here, for each of which there is a smooth adjustment.

Headphone control is configured in a separate menu, allowing correctly determine the actions by clicking on each of the touch buttons. Sony generally has the best app for wireless headphones, I have never seen so many features anywhere else.

AirPods Pro offers a completely different approach. Noise reduction control is available directly in iOS or through a long press on any of the headphones. The strength of the effect is not adjustable, it can only be turned off, turned on, or put into increased audibility mode (“Transparency”).

But the owner from the smartphone can check whether the headphones are sitting correctly, and reassign the actions of pressing the bow hard. But in general, only basic settings are available to the user, there is no such expanse and customization as Sony.

Both models work with voice assistants. For Sony, this
Google assistantfor Apple Siri. Activation is carried out by pressing the button specified in the application.

Conclusion: AirPods Pro are configured directly in iOS, and if you do not have Apple devices, then alas. The Sony application is multi-platform, has a large number of functions and allows you to further customize the headphones for yourself.

Score 3: 3, a point in favor of Sony.

6. Sound quality

The new Sony headphones lack many of the company’s branded audio devices, including LDAC support (aptX also does not work) – only SBS and AAC work. But with all smartphones.

Nevertheless, engineers were able to realize all the possibilities available for such small-sized cases and did not forget to integrate a proprietary chip that implements software improvement of music using DSEE HX technology.

She modifies music from streaming services literally up to Hi-res. True, this works worse with mp3 files.

AiPods works with the same codecs. But with a small caveat: AAC is automatically implemented only with Apple smartphones, and even codec-enabled Android devices are not always able to connect to them appropriately.

Since the Cupertin hardware model is not much different from its predecessors, any additional technologies of “drafting” are not used. And the sound has become better sooner thanks to a change in the form factor, rather than other improvements.

The WF-1000XM3 has a margin in volume and more experience in developing audio devices. It is not surprising that the headphones are able to win back low frequencies, have a fairly wide scene and stand out for their musical abilities against all existing TWS headphones.

The sound of the AirPods Pro is a little worse: the big miniature (which means a lot less) and less weight play a role (because of which it was simply impossible to fit heavy coils).

In a direct comparison, AirPods Pro produces not so deep low frequencies and a little fail at high. Sound stage seems weaker. WF-1000XM3, on the contrary, sound on the four with a plus, except that the middle is slightly littered.

Conclusion: Sony WF-1000XM3 is rightfully the best TWS-headphone in terms of sound quality, and additional refinement using DSEE HX makes it possible to switch to them with good wired headphones. AirPods Pro play music incomparably better than 95% of its competitors, but still they are a bit short of Sony.

Score 4: 3, a point in favor of Sony.

7. Noise reduction work

The previous Sony modification in TWS-version did not please with the quality of noise reduction. The update brought the same 24-bit processor as in the best Cheburashka with the ANC WH-1000XM3.

Changing the design and using only 2 microphones reduced the efficiency, but the maximum “power” completely cuts off the noise of the street and public transport.

Smooth adjustment in the application allows you to adapt the sound for a specific situation, which is precisely the strength of the WF-1000XM3. The same can be said about the individual modes, switching between which is convenient and simple (you can find out more here).

AirPods Pro was Apple’s first noise-canceling model, so waiting for a breakthrough from them is simply pointless. The level of “noise” is one, and its capabilities are barely enough for the street. For trips in transport, it is better to choose something more serious.

The “Permeability” mode works similarly to Sony headphones, but the latter need to understand the settings, since the same result can be obtained in different modes with different options.

Surprisingly, Shumodav works well on an airplane. But here its capabilities are on par with the competitor.

Conclusion: Sony’s advantages over Apple are unconditional – these are the only fully wireless headphones that can completely cut off external noise in the train. Sophisticated fine-tuning requires a single understanding, and only improves use.

Score 5: 3, a point in favor of Sony

8. Telephone calls

Voice transmission WF-1000XM3 is far from ideal. Microphones are too far from the mouth.

Their hobby is noise. And to some extent they forgot about the optimization of voice transmission.

AirPods due to microphones located on the “stems” much closer to the mouth, better capture the voice.

It is also worth noting that engineers have done significant work on the quality of the transmitted stream since the time of the first model, so the role of the AirPods headset is fulfilled perfectly.

Conclusion: If long-term communication is more important than the quality of music, the choice should definitely remain with AirPods.

Score 5: 4, a point in favor of AirPods Pro.

9. Opening hours

A fully charged Apple case makes it possible to listen to music for 17-18 hours instead of the declared day (after several recharges). From a single charge, headphones can work up to 4 hours with noise canceled.

In turn, the WF-1000XM3 allows you to enjoy music for an honest day (3 charges in the case + 1 in the headphones), but 6 hours non-stop. Activating the most dense noise reduction will reduce autonomy by only a couple of hours from the total operating time.

It takes an hour and a half to charge the Japanese, if necessary, charge the case for 3.5 hours. Apple’s product is much friendlier: the case is fully charged in an hour over the wire and over 2 in the air, and half an hour is enough for the headphones.

Conclusion: Fast and wireless charging is a big plus for AirPods. But Sony have been working much longer. In practice, one charge is enough for the whole day, so charging on the go is not required.

Score 6: 4, a point in favor of Sony.

Sony WF-1000XM3 vs AirPods Pro, score 6: 4

Sony WF-1000XM3 stand 14 990 rubles. AirPods Pro will cost in 20 990 rubles.

Noise reduction Sony WF-1000XM3 was still a little better than the AirPods Pro. And the sound quality too. AirPods Pro, in turn, is also very good – they just lack a little saturation, the completeness of the musical picture.

Both models offer the same kit: charging case, ear pads of several sizes, charging cable. However, to use the cable from the AirPods Pro kit, you need to have at least one charger (or laptop) with a USB-C port. Or use a regular Lightning cable.

Pros of Sony WF-1000XM3:

◉ deep customization in the official app
◉ multiple colors
◉ greater autonomy
◉ cool active noise reduction
◉ versatility
◉ price

Pros of AirPods Pro:

◈ smaller size and weight
◈ maximum stability of connection
◈ deep integration in iOS
◈ better-functioning microphones

What makes both models of headphones similar is quality. What Sony WF-1000XM3, what AirPods Pro are objectively the best fully wireless headphones in the outgoing 2019. They are extremely convenient in everyday work, they cope with telephone conversations with dignity, are comfortable with prolonged wearing and play music well.

If I chose the fully versatile TWS headphones today, I would take the Sony WF-1000XM3. Still, they are cheaper, work longer, are not tied to any ecosystem. It is also the best choice for everyone who cares about good sound.

Ordinary AirPods users or owners of Apple gadgets exclusively should try AirPods Pro first. If for some reason you do not like it, then only the WF-1000XM3 remains. Honestly, all the other models on the market after these two are a set of compromises and hidden problems.